HDL-64E S2 manual_Rev B_web.pdf - Velodyne Lidar
HDL-64E S2 manual_Rev B_web.pdf - Velodyne Lidar
HDL-64E S2 manual_Rev B_web.pdf - Velodyne Lidar
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation OverviewFront/Back MountingThe <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong> base provides two mounting options: side mount and top mount. SeeFigure 2 for front/back mounting options, Figure 3 for side/side mounting, and Figure 4 fortop mounting instructions. The sensor can be mounted at any angle from 0 to 90 degrees withrespect to the base of the sensor. Refer to Appendix E for complete dimensions.[152.4mm]6.00Two M8-1.25 x 12mmdeep mounting points.(Four per side, for atotal of 8.)[203.2mm]8.00[21mm].83[25.4mm]1.00MountingBaseFigure 2. Front and back <strong>HDL</strong> mounting illustration.See Figure 2. This figure shows the <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong>’s base plate screw locations with threadedinserts for standard M8 hardware..w ww.velodynelidar.com <strong>HDL</strong>-<strong>64E</strong> <strong>S2</strong> User’s Manual3
Change language