1986-2013 Sportster® & Buell - S&S Cycle

1986-2013 Sportster ® & Buell ®S&S®FORGED ROLLER ROCKER ARMSForged from 8620 steel, heat-treated, and then shot-peened for additional strength and protection fromfatigue, our roller rocker arms were designed to eliminate failure-prone stress areas found in some otherrockers. Most rockers come equipped with 1⁄2" long bushings or needle bearings, however ours utilize 3⁄4"long bronze bushings. The end result is what we believe to be the finest rocker arm available anywhere,for any price.FITMENT• 1986–'12 Harley-Davidson® Sportster®• 1994–’02 Buell®FEATURES AND BENEFITS• Extremely durable rollers reduce valve stem side thrusting with high lift cams• Superior wear and fatigue resistance even in the most demanding applications• 3⁄4" long bushings provide 50% more bushing support area than 1⁄2" long bushingsKIT CONTENTS• 2 front and 2 rear rocker armsS&S® Forged Roller Rocker Arm kitDescriptionPart No.2 front and 2 rear rocker arms 900-4065AAdjustable pushrods must be used with S&S roller rocker arms to obtain proper valve clearance.New rocker arm shafts are recommended for maximum performance and rocker life.MSRP$478.95900-4065APERFORMANCEPARTSParts forTwin Cam 96 /103 2007-2013Parts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2013Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012S&S® Rocker Arm shaftsDescriptionPart No.MSRPParts forVictory®2003-2013Set of 490-4036 (H-D®#17611-83B)Individual90-4006 (H-D®#17611-83B)New rocker arm shafts are recommended for maximum performance and rocker life.$34.95$10.5090-4036RacingProductsReplacement parts for Forged roller rocker armsDescriptionPart No.Front exhaust or rear intake rocker arm900-4065FARear exhaust or front intake rocker arm900-4065RARebuild kits (rebuilds 4 rocker arms) 90-4104Rocker arm bushing (3/4" long) 90-4014MSRP$143.95$143.95$119.95$3.3090-4104Tools & ShopSuppliesDealer Services& Promo ItemsNOTESAdjustable pushrods must be used with S&S roller rocker arms to obtain proper valve clearance.New rocker arm shafts are recommended for maximum performance and rocker life.All reference to H-D® part numbers is for identification purposes only. We in no way are implying that any of S&S Cycle’s products are original equipment parts or thatthey are equivalent to the corresponding H-D® part number shown.Visit us at www.sscycle.comWarranty &Company PolicyOEM Cross ReferenceAppendix & Index4-39