Download PDF - WES Components

More documents

Recommendations

Info

PD Switches and PoE VoIP PhoneWe are aware of that there are PSE switches for supplying power to PoE devices, there are also switches being powered to play as PDs. These switches willnot require any additional power adapters, but still can be deployed in hard to reach areas.VoIP Phones use the Internet to make phone calls which is very cost-effective. Furthermore For large scale of deployment, VoIP PoE Phones are in factgreat solutions as the need to find additional power at each location is removed, since both data and power is provided by the PSE.VoIP ProviderVoIP PhoneRJ-45 Ethernet Cable (Data)FSW-0512PD SwitchPoE (Power + Data)VOI-9300IP-PBXPoE SwitchPSTNFSW-05125-Port Fast Ethernet PD Switch- Complies with IEEE 802.3af PoEStandard- Provides 5-Port 10/100MbpsEthernet connection- Powered Device (PD) Switch canbe powered by PoE Switch or MidSpan Hub- Saving cost by eliminating theneed to install electricity wiringand power outlet- Supports MAC address autolearningand auto-aging- Compact design for desktop orwall-mounting- Plug-and-play for easyinstallation- Max. Power Consumption: 2.5WFSW-08128-Port Fast Ethernet PD Switch- Complies with IEEE 802.3af PoEStandard- Provides 8-Port 10/100MbpsEthernet connection- Powered Device (PD) Switch canbe powered by PoE Switch or MidSpan Hub- Saving cost by eliminating theneed to install electricity wiringand power outlet- Supports MAC address autolearningand auto-aging- Compact design for desktop orwall-mounting- Plug-and-play for easyinstallation- Max. Power Consumption: 3WVOI-9300SIP VoIP PBX with 4 FXO Ports- Advanced telephonymanagement- Supports extensions and voicemail accounts up to 100 and 30concurrent calls- Features a web-calling feature foronline interaction and providesCall Detail Record (CDR)- Provides a VPN server for securedconnectivity- Features powerful interactivevoice response system and voicemessage recording function- Features FXO ports for additionalincoming/outgoing calls via BTlines- Saving call charge by connectingVoIP service provider forinbound/outbound callsVOI-7100SIP VoIP Phone with PoECapability- Traditional phone for digital use- User friendly and packed withVoIP, SIP and PoE features- Provides 2 MB flash memory and8 MB for SDRAM- Registers up to 3 differenttelephone numbers- Enhanced security featuresof HTTP1.1 authentication forweb setup and MD5 for SIPauthentication- Plug-and-play enabled user easyto set-up with keypad15
www.level1.comWireless PoE Access PointsWireless Access Points are attractive for cost effective deployments or expansions of wireless network. With PoE function, the installation and maintenanceof wireless access points are easy and with no consideration for its power sources in their intended locations.WAP-6102PoE APRJ-45 Ethernet Cable (Data)PoE (Power + Data)InternetRouterGigabit PoE SwitchWAP-6012PoE APWAP-310054Mbps Wireless PoEAccess Point- IEEE 802.3af compatible- Fully 802.11g infrastructureoperating mode- Provides 10/100BASE-TX FastEthernet interface- Allows auto fallback data rate foroptimized reliability, throughputand transmission range- Provides 64/128-bit WEP, WPA,and WPA2 network securityencryption- WDS bridging function andprovides AP Client mode- Max. Power Consumption: 4WWAP-6012300Mbps Wireless Gigabit PoEAccess Point- 3 antennas with 2T/3R MIMOtechnology for wireless data rateup to 300Mbps- Compatible with 802.11b/g/nwireless standards- Provides 1 Gigabit Ethernet port(1000Mbps)- 802.3af Power over Ethernet (PoE)for simple deployment- Supports AP, AP Client, Bridge,WDS and Repeater modes- Supports WEP, WPA, WPA2 and802.1x for high level security- Supports Wi-Fi Protected Setup(WPS) technology- Supports Multi-SSID(Up to 8 SSIDs)- Max. Power Consumption: 3.5WWAP-3101108Mbps Wireless Ceiling PoEAccess Point- Complies wireless network speedup to 108Mbps with Super Gand backward compliant with802.11b/g standards- Embedded two 4dBi directionalantennas in MIMO configuration- 802.3af PoE compliant for easynetwork deployment- Supports WEP, WPA, WPA2 andIEEE 802.1x for high level security- Browser-based interfaceconfiguration and management- Support QoS (WMM) to enhanceuser performance and density- Supports Multi-SSID function(4 SSID) in AP modeWAP-6102300Mbps Wireless Ceiling PoEAccess Point- 2 built-in antennas (4dBi) with2T/2R MIMO technology forwireless data rates of up to300Mbps- Complies with IEEE 802.11nand backwards compliant with11b/g standards on the 2.4GHzfrequency- Supports AP, WDS and Repeatermodes- WEP, WPA, WPA2 and IEEE 802.1xfor high level security- Supports Quality of Service(WMM) to enhance userperformance and density- Multi-SSID with 802.1Q VLANTagging in AP mode(up to 4 SSIDs)- Max. Power Consumption: 4W16
Page 1: one world_one brand_one level_www.l
Page 4 and 5: How does it work?A standard Cat.5 E
Page 6 and 7: Mid Span HubsPoE Mid Span Hubs are
Page 8 and 9: FSW-16718 FE PoE + 8 FE Web Smart S
Page 10 and 11: PoE Powerline Communication (HomePl
Page 12 and 13: PoE SplittersNot all IP devices are
Page 14 and 15: iPhone iPhone iPhoneFCS-3031 / FCS-
Page 18: WAB-3001/WAB-300254Mbps Wireless Ou
Page 21: www.level1.comPoE RepeatersPoE Repe
Page 24 and 25: The diagram highlights the advantag
Page 26 and 27: Adding PoE Function to an existing
Page 28 and 29: An alternative to POI-4000 is the F
Page 30: Digital Data Communications Groupww

Download PDF - WES Components

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?