Download PDF - WES Components

www.level1.comOutdoor Camera HousingLevelOne offers durable outdoor housings so that cameras can monitor the entrance of building or exterior environments. These housings protectcameras from weather, dust and dirt, as well as offer extra add-on features like fans, heaters and Infrared LEDs. However these extra add-ons alsoconsume a significant amount of power, and regularly exceeds the specifications of the PoE standard, therefore a power outlet to be located close to thecamera, limiting the flexibility of placements is required.With LevelOne’s POI-4000 High-Power PoE Injector and the POM-1100 PoE Module, installers can now apply PoE to this devices and place the cameras inany location they choose.RJ-45 Ethernet Cable (Data)PoE (Power + Data)Non-PoE Switch100m 100m ++PoE Injector (40W)PoE Module2-Megapixel PoENetwork CameraOutdoor HousingPoE RepeaterThe POM-1100 PoE Module takes power and data sent over the network cable from the PSE and distributes it the other devices in thecamera housing. It provides up to 12V DC/2.5A for the IP camera, housing fan and heater and fits with LevelOne’s BOH-1100/BOH-1200/BOH-1300 outdoor housings.LEDDC Power OutputData OutputPoE InputBox type outdoor housing -POM-1100PoE ModuleBOH-1100PoE Upgradable Outdoor Housing(12V DC/24V AC)BOH-1200Day/Night PoE Upgradable Outdoor Housing(12V DC/24V AC)BOH-1300PoE Upgradable Outdoor Housing with(12V DC/24V AC)Works with:FCS-1101/FCS-1091/FCS-1121/FCS-1131/FCS-1141/FCS-1151(refer to page 13)26Works with:FCS-1091/FCS-1121/FCS-1131/FCS-1141/FCS-1151(refer to page 13)Works with:FCS-1101/FCS-1121(refer to page 13)