Download PDF - WES Components

The diagram highlights the advantages of using a 40W High-Power PSE as it shows a total distance between the PSE and PD up to 800m, leaving around7.5W which is enough to power the Outdoor Wireless Access Point as it only uses 5.85W.RJ-45 Ethernet Cable (Data)PoE (Power + Data)PD (5.85W max.)Non-PoE Switch800mRequires No Local Power SupplyPOI-4000PSE (40W)POR-0100 POR-0100 POR-0100 POR-0100 POR-0100 POR-0100The only time a power outlet is required is at PSE. All repeaters and the PD do not require any local power sources as all the power and datawould still be sent thru one cable.LevelOne also offers 2-Port PoE Repeaters (POR-1102, POR-0102) which is ideal when you have two PoE devices at the same location. This will eliminatethe need to run two separate PoE lines.PoE (Power + Data)100mStandard 15.4W PoE PSE100mPD1+PD2 ≤ 10.9WPoE Wireless AP2-Port PoE Repeater100mPD1PD2100m100m2-Port PoE Repeater100mPoE RepeaterPD3+PD4 ≤ 10.9WPoE Network CameraPD3Indoor100mPD4Both all PoE Repeater solutions from LevelOne are available in indoor and outdoor housings. Outdoor housings are IP66 compliant to withstandextreme weather conditions for deploying in harsh environments.23