Download PDF - WES Components

www.level1.comWireless PoE Access PointsWireless Access Points are attractive for cost effective deployments or expansions of wireless network. With PoE function, the installation and maintenanceof wireless access points are easy and with no consideration for its power sources in their intended locations.WAP-6102PoE APRJ-45 Ethernet Cable (Data)PoE (Power + Data)InternetRouterGigabit PoE SwitchWAP-6012PoE APWAP-310054Mbps Wireless PoEAccess Point- IEEE 802.3af compatible- Fully 802.11g infrastructureoperating mode- Provides 10/100BASE-TX FastEthernet interface- Allows auto fallback data rate foroptimized reliability, throughputand transmission range- Provides 64/128-bit WEP, WPA,and WPA2 network securityencryption- WDS bridging function andprovides AP Client mode- Max. Power Consumption: 4WWAP-6012300Mbps Wireless Gigabit PoEAccess Point- 3 antennas with 2T/3R MIMOtechnology for wireless data rateup to 300Mbps- Compatible with 802.11b/g/nwireless standards- Provides 1 Gigabit Ethernet port(1000Mbps)- 802.3af Power over Ethernet (PoE)for simple deployment- Supports AP, AP Client, Bridge,WDS and Repeater modes- Supports WEP, WPA, WPA2 and802.1x for high level security- Supports Wi-Fi Protected Setup(WPS) technology- Supports Multi-SSID(Up to 8 SSIDs)- Max. Power Consumption: 3.5WWAP-3101108Mbps Wireless Ceiling PoEAccess Point- Complies wireless network speedup to 108Mbps with Super Gand backward compliant with802.11b/g standards- Embedded two 4dBi directionalantennas in MIMO configuration- 802.3af PoE compliant for easynetwork deployment- Supports WEP, WPA, WPA2 andIEEE 802.1x for high level security- Browser-based interfaceconfiguration and management- Support QoS (WMM) to enhanceuser performance and density- Supports Multi-SSID function(4 SSID) in AP modeWAP-6102300Mbps Wireless Ceiling PoEAccess Point- 2 built-in antennas (4dBi) with2T/2R MIMO technology forwireless data rates of up to300Mbps- Complies with IEEE 802.11nand backwards compliant with11b/g standards on the 2.4GHzfrequency- Supports AP, WDS and Repeatermodes- WEP, WPA, WPA2 and IEEE 802.1xfor high level security- Supports Quality of Service(WMM) to enhance userperformance and density- Multi-SSID with 802.1Q VLANTagging in AP mode(up to 4 SSIDs)- Max. Power Consumption: 4W16