Pumps - PT Hydraulics

®6RTSERIESRSS SERIESR_____CSERIESRHASERIESRASERIESC SERIESR_____D SERIESCylinders/RamsRDSERIESRH SERIESRLS SERIESR_____L SERIESHighlights:• All cylinders are date-coded and max. rated pressure and capacitymetal stampedManufacture in-housePioneered conformance with ANSI B30.1 standards•All cylinders fully tested to 125% capacity before leaving factoryCylinder bores are roller burnished to harden surface and providesmoother surface to increase seal life by additional 30%•Base mounting holes suitable for use at maximum capacityTypical cylinder burst pressures range from 25,000 psi•(1,750 bar) to 35,000 psi (2,450 bar)Cylinders with gland nuts may be dead ended at 10,000 psi(700 bar)Assembled and tested by certified assemblersAll cylinders covered by Power Team Lifetime Marathon WarrantyEddy Current and/or Mag Particle inspected to detect flaws in steelAll parts/components packaged in special materials to prevent rustBaked epoxy finishPower Tech surface treatment on critical componentsFull coverage decals on “C” Series cylinders/rams•Higher quality product resulting in fewer warranty claimsRemove material from O.D. to ensure flaws are removed. Other usematerials as drawn(rolled) at the mill.•Solid body cylinder – not welded like some competitorsRemovable carry handles standard on most cylinders.6Rev. 3-3-97