Pumps - PT Hydraulics

®100 Ton Enforcer PullersFeatures:•Grip-O-Matic pulling featureAdjustable jaws•Lifting bracket•Adjusting screw•Spring loaded featureTow bar and large wheelsadapters•Pushing•Power pump•Remote controlBenefits:•The harder the pulling force the tighter the jaws gripJaws can be adjusted so that they always pull on a flat•surfacePuller can be lifted if workpiece center line is more than•36”(914 mm) off floorPuller centerline has vertical adjustment of 12”(305 mm) to 36”(914 mm)Puller will align itself•Makes moving puller easySix pushing adapters, 2-1/2”(64 mm) and 4-1/8”(105 mm) diameters. Matched to the ram, shorten•pushing stroke1-1/8 H.P., 115 volt two stage pump also available in•220 volt, 50 HZ25 foot (7.6M) cord on remote hand control allowsoperator to stand away from work-piece.5050Rev. 7-31-95