Pumps - PT Hydraulics

®Manual and Hydraulic Push-PullersPullersFeatures:•Push-pull feature on all models10,17-1/2 and 30 ton manual push-pullers17-1/2, 30 and 50 ton hydraulic push-pullers6-1/4”(159 mm) to 30-5/8”(778 mm) of reach2-1/8”(54 mm) to 20-1/2”(521 mm) of spread•Standard hydraulic rams•Forcing screw and leg ends designed to matchaccessoriesBenefits:•Designed to remove and install tight-fitting partsEach unit has a spread range and optional leg lengthsdesigned to match the push-puller capacity•Rams can be removed and used in other hydraulic•applicationsForcing screws can be matched to internal pullingattachments; male to female and female to femalethreaded adapters, step plates and shaft protectorsLeg ends can be matched to bearing pulling attachments;leg end adapters, male to female and female tofemale threaded adapters4444Rev. 2-1-96