FLUENT for CATIA V5 - Figes.com.tr

<strong>FLUENT</strong> ® <strong>for</strong> <strong>CATIA</strong> ® <strong>V5</strong>5.0 RELEASE<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>Product FeaturesWorkflow4Fully <strong>CATIA</strong> <strong>V5</strong> PLM-based workflow4Rapid flow modeling technologyspeeds up the analysis process4Fully generative relationship betweengeometry model and analysis model4Knowledge-based optimization-ready4Allows remote submission on<strong>com</strong>pute clustersCAD Geometry4<strong>CATIA</strong> <strong>V5</strong> native or imported partsand assemblies4Automated flow volume creation,cleanup and simplification(defeaturing)4Solid geometries can be easilyconverted to flow volumes4Inlets and outlets can be renderedwith different colorsGeneral Modeling Capabilities4Compressible and in<strong>com</strong>pressibleflow4Three-dimensional, steady-state ortransient flows4Inviscid, laminar and turbulent flows,with the most advanced turbulencemodeling capabilities in the industry4Internal and external flows4Multiple reference frame and slidingmesh models <strong>for</strong> rotating machinery4Lumped parameter models <strong>for</strong>porous media, fans, vents and heatexchangers4Newtonian or non-Newtonian flows4Heat transfer including <strong>for</strong>ced,natural and mixed convection;conjugate (solid/fluid) heat transfer4Multiple species transport to modelgas or liquid mixturesRapid Flow Modeling <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> Environment<strong>FLUENT</strong> ® <strong>for</strong> <strong>CATIA</strong> ® <strong>V5</strong> software brings fluid flow and heat transfer analysisinto the <strong>CATIA</strong> <strong>V5</strong> product lifecycle management (PLM) environment. Operating<strong>com</strong>pletely within the native <strong>CATIA</strong> <strong>V5</strong> data structures, <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>software provides a full generative relationship between manufacturing-readygeometry models and the flow analysis model. It reduces the cycle time <strong>for</strong> <strong>com</strong>putationalfluid dynamics (CFD) analysis and enables a simulation-based design approach in whichdesign, analysis and optimization happen all within the single workflow of the <strong>CATIA</strong> <strong>V5</strong>PLM environment. This results in better-per<strong>for</strong>ming products designed in a shorter time.A Partnership with Dassault SystèmesANSYS, Inc., a leading provider of Simulation Driven Product Development andCFD solutions, and Dassault Systèmes, a leader in product lifecycle management (PLM)solutions, have worked together to develop <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> software. The tightdevelopment partnership between the two <strong>com</strong>panies has resulted in a <strong>com</strong>plete CFDprocess, from geometry conditioning to post-processing, residing entirely inside the<strong>CATIA</strong> <strong>V5</strong> interface. This integrated solution enables <strong>com</strong>panies to perfect productper<strong>for</strong>mance early in the design cycle.ANSYS has more than 20 years of CFD experience. The ANSYS network of offices anddistributorships guarantees nearby access to its services in the local language.The PLM embedded solution cycle of <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>

<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>Product Features4Cavitation phenomena4Multiphase flows with freesurfaces, including openchannel flows4Automatic solution processBoundary Conditions4Pressures, velocities, mass flowrates and volumetric flow ratesat inlets and outlets4Far field, symmetry and periodicboundary conditions4Stationary or moving walls with orwithout internal conduction, heatgeneration and thermal resistances4Data mapping and time variationof boundary parameters4Moving mesh <strong>for</strong> time dependentrotating machinery problems4Multiple reference frame <strong>for</strong>rotating machinery4Display of boundary conditiondata in <strong>CATIA</strong> <strong>V5</strong> tree4Per phase boundary conditions <strong>for</strong>two-phase flows with free surfaces,including top and bottom liquidlevel <strong>for</strong> open channels flowsThe hybrid mesh in acar engine radiatorPLM Integration<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> technology helps ensure that <strong>com</strong>panies make the most of their<strong>V5</strong> PLM investments. The software is based on Dassault Systèmes’ CAA <strong>V5</strong> infrastructureand native data structures; it is the first fully <strong>V5</strong> PLM-integrated CFD solution that revealsthe effects of fluid dynamics.Temperature contours in a car engine radiator<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> software is more than CFD embedded into the CAD program; it isCFD absorbed into the <strong>V5</strong> PLM processes of the world's leading manufacturing <strong>com</strong>panies.The interface is similar to Dassault Systèmes' structural analysis software, making it easy tolearn, easy to use and easy to remember. Because <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> technology uses thesame geometry, meshing and post-processing tools as Dassault Systèmes' structural analysissoftware, analysis knowledge and skills can be translated to the CFD program. Results can betransferred easily to other packages residing within the <strong>V5</strong> PLM environment.Rapid Flow ModelingRapid flow modeling is the strategy of capturing well-understood modeling techniques andencapsulating them into an easy-to-use, highly automated, graphical user environment. Thekey benefit to users is the ability to per<strong>for</strong>m quick CFD validations of design alternatives.<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> software incorporates the rapid flow modeling approach to providea high level of automation, which is key to the use of CFD as a design decision support tool.Tasks that require a lot of manual intervention, such as meshing, solution steering andreporting, are fully automated. <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> software provides customized toolsto quickly extract a flow volume from the solid parts, a crucial first step in the CFD process.The automated meshing logic cuts the time it takes engineers to create high-quality<strong>com</strong>putational meshes — from days to minutes.www.ansys.<strong>com</strong>

5.0 RELEASESpecify the physics, and <strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> technology will per<strong>for</strong>m the simulationwithout the need to monitor the calculation. The built-in rapid flow modeling technologydramatically cuts the engineering time required to per<strong>for</strong>m a CFD analysis. Once the simulationis done, <strong>com</strong>prehensive reports are generated. All models are fully upward-<strong>com</strong>patible withANSYS ® <strong>FLUENT</strong> ® software, a leading fluid dynamics product in the ANSYS portfolio. Engineerscan do more and better analyses faster, all within their familiar <strong>CATIA</strong> <strong>V5</strong> environment.Flow pathlines colored by velocitymagnitude on an airplane anti-icingsystemVelocity vectors and temperature field onan airplane anti-icing systemMesh section showing prism boundary layers and tet/hybrid mesharound an aircraft fuselage and engine nacelle<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>Product FeaturesMaterial Properties4Comprehensive database of gases,liquids and mixtures, as well as thematerial database available in<strong>CATIA</strong> <strong>V5</strong>4User sites can add custom materialsto local database installations4Users can directly enter properties<strong>for</strong> additional materials4Thermal expansion coefficients areavailable <strong>for</strong> all materials4Temperature dependent materialproperties can be definedMeshing4Fully automated and transparent4Resolution and element typesautomatically tailored <strong>for</strong> highefficiency and desired accuracyInterface, Graphics, Post-Processing and Reporting4Interface similar to DassaultSystèmes analysis tools (GPS)4Post-processing tools from DassaultSystèmes analysis modules enhanced<strong>for</strong> CFD4Automatic reports of flow and heattransfer in<strong>for</strong>mation with embeddedalerts and graphics4Convenient visualization of pressure,velocity and temperature fields oneasily swept planes and boundaries4Animation of simulation results4Display of flow pathlines4Display of residual plots and multiplemonitors (surfaces, <strong>for</strong>ces, torque)to analyze the results and controlsolution convergence4Extensive and intuitive customizationcapabilities to expand modelingfunctionalities and deploy wellprovenworkflow4Multiple levels of control of entiresolution process to fit full CFDproduct life cycle needs4Support <strong>CATIA</strong> <strong>V5</strong> VB scripting andmacros4Remote submission of solution onLINUX ® /Windows ®

5.0 RELEASE<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong>Product Features4Automatic data transfer and plotcreation in ANSYS ® CFD-Post TM4Easy cut-plane creation <strong>for</strong> datavisualization4Image trans<strong>for</strong>mation tool torecover full geometry fromsymmetric or periodic sectionsduring post-processingOnline Help and Documentation4Complete hypertext-based onlinedocumentation4Comprehensive User’s Guide4Tutorial guide with model-specificexamples4Online access to a <strong>FLUENT</strong> <strong>for</strong><strong>CATIA</strong> <strong>V5</strong>-specific website withproduct and support resourcesCompatibility4Fully <strong>com</strong>patible with ANSYS <strong>FLUENT</strong>,FloWizard ® , ANSYS CFD-Post andTGrid ® <strong>for</strong> additional analysis, postprocessingand meshing capabilities4Compatible with geometric,simulation, optimization and filemanagement modules embeddedinto <strong>CATIA</strong> <strong>V5</strong> PLM4Windows ® XP <strong>for</strong> pre-processingand post-treatment into <strong>CATIA</strong> <strong>V5</strong>Supported Hardware4Windows XP 32- and 64-bit <strong>for</strong>pre-processing and post-treatmentinto <strong>CATIA</strong> <strong>V5</strong>4Solver can run on Windows XP anda wide variety of other <strong>com</strong>putingplat<strong>for</strong>ms in both 32- and 64-bit andin serial or parallel4Solver can be run remotely onLINUX or Windows machinesdedicated <strong>for</strong> <strong>com</strong>putation oron clusters.Applications<strong>FLUENT</strong> <strong>for</strong> <strong>CATIA</strong> <strong>V5</strong> software uses one of the world's most validated CFD solvers,<strong>FLUENT</strong>, which can handle demanding applications such as:4 Automotive: cabin heating, ventilation systems, engine cooling, air intakes, exhaustmanifolds, catalytic converters, mufflers, water jackets, fuel injectors, fuel cells andmany more <strong>com</strong>ponents4 Aerospace: environmental control systems, including cabin and cockpit ventilationsystems4 Electronics: electronics cooling and thermal management systems4 Equipment manufacturing: valves, flow meters, ducts, heat exchangers, molds, pumps,mixing devices and dies4 External flows including aerodynamic design and propeller design4 HVAC: building heating and ventilation, including clean rooms, fire and contaminationdetection and architectural design4 Marine: hydrodynamics of flow around boats and ships in open channels and impellerswith cavitationSpecies concentration in a static mixerFlow lines colored by pressure in a static mixerThe ANSYS AdvantageWith the unequalled depth and unparalleled breadth of our engineering simulationsolutions, <strong>com</strong>panies are trans<strong>for</strong>ming their leading edge design concepts into innovativeproducts and processes that work. Today, 97 of the top 100 industrial <strong>com</strong>panies on the“FORTUNE Global 500” invest in engineering simulation as a key strategy to win in a globally<strong>com</strong>petitive environment. They choose ANSYS as their simulation partner, deploying theworld’s most <strong>com</strong>prehensive multiphysics solutions to solve their <strong>com</strong>plex engineeringchallenges. The engineered scalability of our solutions delivers the flexibility customersneed, within an architecture that is adaptable to the processes and design systems of theirchoice. No wonder the world’s most successful <strong>com</strong>panies turn to ANSYS – with a trackrecord of almost 40 years as the industry leader — <strong>for</strong> the best in engineering simulation.www.ansys.<strong>com</strong>ANSYS, Inc.Southpointe275 Technology DriveCanonsburg, PA 15317U.S.A.724.746.3304ansysinfo@ansys.<strong>com</strong>Toll Free U.S.A./Canada:1.866.267.9724Toll Free Mexico:001.866.267.9724Europe:44.870.010.4456eu.sales@ansys.<strong>com</strong>ANSYS, ANSYS Workbench, HPSS, AUTODYN, CFX, <strong>FLUENT</strong> and any and all ANSYS, Inc. brand,product, service and feature names, logos and slogans are registered trademarks or trademarks ofANSYS, Inc. or its subsidiaries in the United States or other countries. ICEM CFD is a trademarkused under license. All other brand, product, service and feature names or trademarks are theproperty of their respective owners.Image Credits: Some images courtesy FluidDA nv, Forschungszentrum Joülich GmbH, Heat TransferResearch, Inc., Riello SPA and iStockphoto.<strong>com</strong>© 2009 ANSYS, Inc. All Rights Reserved. Printed in U.S.A. MKT0000469 11-09