Annexure A

More documents

Recommendations

Info

SCHEDULE OF WORKN/W:S/H:-MOEI & fans RMO p/sets I/c st. light at Var. Police Bldgs At DAP Lines K.W. Camp Delhi.Repairing of burnt out and damaged wiring in vrs. Qtrs & barracks.S.No. Description of Item Qty. Rate Unit Amt.1 Rewiring for light point/fan point/exhaust fan point/ call bell point with1.5 sq. mm FR PVC insulated copper conductor single core cableand 1.5 sq.mm FR PVC insulated copper conductor single corecable as earth wire in existing surface/recessed steel/PVC conduitincluding dismantling as reqd.a) 1.21.1 Group A 100 point pointb) 1.21.3 Group C 300 point point2 Supplying and drawing following sizes of FR PVC insulated copperconductor, single core cable in the existing surface / recessed steel /PVC conduit as required.a) 1.23.3 3 x1.5 sq.mm 50 mtr mtrb) 1.23.21 3 x 4 sq.mm 200 mtr mtrc) 1.23.30 3 x 6 sq.mm 150 mtr mtr3 Wiring for light point/fan point/exhaust fan point/ call bell point with1.5 sq. mm FR PVC insulated copper conductor single core cable insurface/recessed PVC conduit with piano type switch, phenoliclaminated sheet, suitable size M.S. box and earthing the point with1.5 sq.mm FR PVC insulated copper conductor single core cableetc. as reqd.a) 1.11.1 Group A 30 point pointb) 1.11.3 Group C 50 point point4 Supplying and fixing following way, single pole and neutral, sheet,steel MCB distributions board, 240 volts, on surface/recess,complete with tinned copper busbar, neutral busbar, earth bar, dinbar, detachable gland plate, interconnections, phosphatizea) 2.31.6 8 way Double door 15 nos eachb) 2.31.6 12 way Double door 25 mts. each5 Supplying and fixing 5 amps. To 32 amps rating, 240 volts,'B' series,miniture circuit breaker suitable for lighting and other loads offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as reqd.a) 2.51.1 Single pole 340 nos eachb) 2.51.1 Single pole and neutral 40 each each6 Supplying and fixing of following sizes of PVC conduit alongwithaccessories in surface/recess including cutting the wall and makinggood the same in case of recessed conduit as reqd.a) 1.32.1 20 mm 50 mtr mtrb) 1.32.2 25 mm 50 mtr mtrTerms & Conditions:1 The work shall be carried out as per CPWD Specifications.2 No T&P shall be issued to the contractor.The material shall be got approved from Engineer-in-charge before3 use at site.4 Nothing extra towards labour wastage etc. shall be paid.5 The dismentalled shall not be returned to the department.Total
SPECIFICATION AND SPECIAL CONDITIONS1. Work shall be carried out as per CPWD specifications for electrical works 2005, for internal F.1 CPWDspecification and 1995 for external services and the Indian Electricity Rule-1956 as amended upto date forsuch works.2. All the materials, whatsoever, to be supplied and provided by the contractor should be of standard andapproved quality. These should be got approved from the Engineer-in-Charge or his authorizedrepresentative before installation. No payment will be made for any unapproved or sub standard/rejectedmaterials used on the work. Rejected material should be removed from the site of work within 48 hoursfailing which the same will be liable for removal by the department at the risk and cost of contractorwithout any liability.3. The electric work shall be done in closed co-ordination and in phase, strictly with civil works whereverthese are in control of this office no claim for idle labour shall be entertained under this agreement.4. Any damage done to the building while executing the electric work should be made good to thesatisfaction of the department. The chases, holes etc. cut in the walls and roofs should be filled within twodays. All marlba should be removed on the same day. In case of failure to do so it will be got done by theEngineer-in-Charge or his authorized representative at contractor’s risk and cost.5. All watch and ward of the materials installed at work will be responsibility of the contractors till theirhanding over to the department on completion of work. Merely recording of measurement and runningpayments made to the contractor. There will be regular handing over/taking over the installation. Anymissing item shall have to be made good by the contractor.6. Contractor shall submit neatly prepare electric inventory of fittings provided along with completion plan intriplicate (one of them on tracing cloth) and also test report of the electrical installation failing whichnecessary recovery will be affected.7. Laying of the conduit, position of switches, fittings and cable routes etc. should be got approved by theEngineer-in-Charge or his authorized representative. It will be in the interest of the contractor to mark theabove layout at site and get it approved before actual execution of the work otherwise it will be acceptedand the contractor will have to get it redone for which no extra payment will be made.8. Persons executing electrical work should have electrical license as required under I.E. Act.9. The earthing shall invariably be done in presence of the AE/JE incharge of the work.10. All interconnections in the switch boards shall be carried out with suitable cables commensurate with thecurrent carrying capacity.11. The sub-main and circuit wiring stipulated or otherwise on linear basis will be measured and paid from endto end of conduit. No extra payment will be made for loose wiring for connections. Sufficient length ofwire is, however, to be left as per directions of Engineer-in-Charge or his authorized representative forconnections etc.12. All I.C. switches and DBs wherever required will be numbered and marked with paint and nothing will bepaid on this account.13. All I.C. Boxes and junction boxes should be cleared and cleaned properly and painted form before wiringand fixing the accessories.14. Wherever wooden battens are provided inside the C.I. Box, for fixing accessories, these should be paintedwith single coat of paint/varnish and fixed security by means of machine screws to C.I. Box which willhave the threads for machine screws.
Page 1 and 2: Annexure AThe Assistant Engineer(E)
Page 3 and 4: Tenderers are advised to inspect an
Page 5 and 6: SCHEDULESSCHEDULE 'A'Schedule of Qu
Page 7: Clause 42i) (a) Schedule/statement
Page 11: LIST OF APPROVED MAKES1. PVC insula

Annexure A

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?