Model 610AR Installation and Maintence Instructions Drive Axle Air ...
Model 610AR Installation and Maintence Instructions Drive Axle Air ...
Model 610AR Installation and Maintence Instructions Drive Axle Air ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Instructions</strong> <strong>Model</strong> <strong>610AR</strong>3/8 BOLTSTYP 2XDisconnect linkage here8Adjust hereHEIGHT CONTROL VALVEADJUSTMENT (FOR UNITS SOEQUIPPED)1. Position the assembled, unladen vehicle on alevel floor with air pressure of 90+ psi, availableto the system.2. Disconnect linkage <strong>and</strong> exhaust all air from thesprings.3. Reconnect the linkage, <strong>and</strong> let the springsinflate. Measure frame-to-axle centerline distance.If correct, no adjustment is needed. If incorrect,use adjustment feature on linkage, or on HCV.4. Recheck by disconnecting the linkage <strong>and</strong>deflating the spring. When the linkage isreconnected, the springs should reinflate to theproper mounting height.Height Control Adjustments<strong>Drive</strong> <strong>Axle</strong> <strong>Air</strong>-Ride Suspension Systemi.10
Change language