Hydrotech Brochure - Barbour Product Search

More documents

Recommendations

Info

Installation ProcedureFlex Flash F DetailReinforcementDetailed reinforcement work consists of asandwich of:■ Hydrotech 6125■ Flex Flash F reinforcement■ Hydrotech 6125■ Hydrogard protection sheetThe steps taken to form reinforcedexternal and internal corners forupstands in Flex Flash F, are illustratedon this page.Reinforcement at External Corner of UpstandStep AFlex Flash FreinforcementStep BFlex Flash FreinforcementHydrotechMonolithic Membrane 6125HydrotechMonolithic Membrane 6125Step CCompletely encapsulate exposed reinforcement by applying a top coat of Hydrotech Monolithic Membrane6125, and finally cover with Hydrogard protection sheet.Reinforcement at Internal Corner of UpstandStep AFlex Flash F reinforcement(cut and folded to formdouble layer at stop end)Step BOverlapping Flex Flash F reinforcement(cut and folded to form double layer at stop end)Hydrotech MonolithicMembrane 6125Step CHydrotech MonolithicMembrane 6125Completely encapsulate exposed reinforcement by applying a top coat of Hydrotech Monolithic Membrane6125, and finally cover with Hydrogard protection sheet.16www.alumascwaterproofing.co.uk
Installation ProcedureFlex Flash UN DetailReinforcementWhere minor movement is anticipated,Flex Flash UN, an uncured neoprenewith a peel-off protective outer film,must be employed.Detailed reinforcement work consists ofa sandwich of:Reinforcement at External Corner of UpstandStep ARemove outer film at end only. Whilst the membrane isstill warm the Flex Flash UN is stretched around thecorner and moulded tightly into the angles, leaving noairspaces. The Flex Flash UN will permanently cure intothis shape upon cooling.50mmminStep BRemove outer film from preceding piece and fromend of new piece. The overlapping Flex Flash UN isapplied as per step A, with a minimum overlap of50mm. Remove outer film when cool.50mmmin■ Hydrotech 6125■ Flex Flash UN reinforcement■ Hydrotech 6125■ Hydrogard protection sheet.The steps taken to form reinforcedexternal and internal corners forupstands in Flex Flash UN, areillustrated on this page.Outer filmHydrotechMonolithic Membrane 6125Flex Flash UNreinforcementHydrotechMonolithic Membrane 6125Flex Flash UNreinforcementReinforcement at Internal Corner of UpstandStep AWhilst the membrane is still warm, the Flex FlashUN is manoeuvred into the corner with the excessmaterial pinched into the vertical corner.Outer filmpeeled backFlex Flash UNreinforcementStep BA small amount of membrane is applied inside theexcess loop, the sides of which will then sticktogether when pressure is applied.Flex Flash UNreinforcementStep CWait for membrane to cool and remove outer film.Flex Flash UNreinforcementHydrotechMonolithic Membrane 6125Step DThe excess material flap is then adhered to oneside with a small amount of membrane.HydrotechMonolithic Membrane 6125Step EThe next piece of membrane is dressed into thecorner, but not around it. Wait for membrane tocool and remove outer film.Outer filmNotes■ Always pull back 25mm or so from a cornerof the peel off separator film prior toinstallation, for ease of removal after cooling.Flex Flash UNreinforcementFlex Flash UNreinforcementFlex Flash UNreinforcement■ As the final step in the formation of theexternal and internal upstands, completelyencapsulate exposed reinforcement byapplying a top coat of Hydrotech MonolithicMembrane 6125, and finally cover withHydrogard protection sheet.HydrotechMonolithic Membrane 6125Alumasc Technical Helpline +44 (0) 1744 64840017
Page 2 and 3: Maintaining a Flow of Informationww
Page 6 and 7: Hydrotech Structural Waterproofing
Page 8 and 9: Key BenefitsHydrotech is BBA accred
Page 10 and 11: Typical Areas of Application1Protec
Page 12 and 13: Hydrotech Project GalleryAlumasc’
Page 14 and 15: Hydrotech Track RecordProject Date
Page 18 and 19: Installation ProcedureHydrotech Mon
Page 20 and 21: Specification - Protected Roofs (in
Page 22 and 23: Specification - Green RoofsLawns, R
Page 24 and 25: Specification - SubstructuresTankin
Page 26 and 27: Specification - Access RoadwaysAcce
Page 28 and 29: Hydrotech System Components and Acc
Page 30 and 31: Complementary Products and SystemsZ
Page 32 and 33: Complementary Products and SystemsH
Page 34 and 35: Complementary Products and SystemsS
Page 36 and 37: Scope of the DetailsThe structural
Page 38 and 39: Application DetailsMain Roof Area
Page 40 and 41: Application DetailsRainwater Outlet
Page 42 and 43: Application DetailsUpstand — 2Hyd
Page 44 and 45: Application DetailsAbutment — 1Hy
Page 46 and 47: Application DetailsPenetration —
Page 48 and 49: Application DetailsJoint — 1Hydro
Page 50 and 51: Application DetailsJoint — 4Hydro
Page 52 and 53: Product DataSystem ComponentsHydrot
Page 54 and 55: Alumasc Project SupportAlumasc Tech
Page 56: premium products • proven solutio

Hydrotech Brochure - Barbour Product Search

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?