Hydrotech Brochure - Barbour Product Search

Installation ProcedureHydrotech MonolithicMembrane 6125 to MainHorizontal AreasAfter the details have been completed,Hydrotech Monolithic Membrane 6125 isthen applied to the main roof areas usinga squeegee.1. The first coat of Hydrotech MonolithicMembrane 6125 is applied to a nominalthickness of 3mm.2. Flex Flash F fabric reinforcement isembedded while the Hydrotech isstill warm and tacky.3. A second coat of Hydrotech MonolithicMembrane 6125 is applied also to anominal thickness of 3mm, fullyencapsulating the fabric reinforcementwithin the membrane.4. A protecting sheet of Hydrogard islaid over the completed Hydrotechmembrane. The grade of Hydrogardis chosen to match the anticipatedintensity of subsequent operations.Refer also to Hydrotech SystemComponents and Accessories,page 28.5. Install the chosen roof finish.In the diagram on page 19, an invertedroof construction is shown completewith insulation, filter sheet, andpaving slabs using Harmer Modulockraised paving supports.1. Applying the first coat of HydrotechMonolithic Membrane 6125 with asqueegee2. Laying Flex Flash F reinforcement3. Applying the second coat of HydrotechMonolithic Membrane 61254. Laying the Hydrogard protection layerover second coat of HydrotechMonolithic Membrane 612518www.alumascwaterproofing.co.uk