Hydrotech Brochure - Barbour Product Search

Key BenefitsHydrotech is BBA accredited, fully warranted and is designed to last for the life of thebuilding. The system fully bonds to the structure avoiding any chance of water tracking,with no possibility of lap failure.Lifetime PerformanceHydrotech, the original hot-melt, rubberised bitumen membrane, isdesigned to last for the lifetime of the building or structure to which itis applied, which means long-term waterproofing integrity and no futurereplacement costs.Low Lifecycle CostThe Hydrotech System’s proven longevity, durability, unique formulationand method of application make it the most cost effective, long-termwaterproofing solution.British Board of Agrément ApprovedHydrotech is approved by the British Board of Agrément, who state“...when fully protected and subjected to normal service conditions,Hydrotech will provide an effective barrier to the transmission of liquidwater and water vapour for the design life of the structure/roof in whichit is incorporated”.European Technical ApprovalHydrotech is the only 6mm hot melt rubberised bitumen waterproofingsystem to hold European Technical Approval, which confirms compliancewith the EC Construction Products Directive.Fully Bonded Monolithic ApplicationApplied in a liquid state to the deck (with a polyester reinforcement),the bond of Hydrotech Monolithic Membrane 6125 is 100% absolute.There is no risk whatsoever of water tracking below the membraneand, because it is monolithic, no possibility of lap failure.No Fall RequiredCost savings will be made by the omission of screeds to falls and on thereduction of weight and curing time involved. The Hydrotech systemis unaffected by standing water, dilute acids and fertilizers, and doesnot leach.Recycled ContentHydrotech is a hot applied, rubberised bitumen. Specially formulatedfrom refined bitumen, synthetic rubber and inert clay filler, Hydrotechcontains up to 25% post-consumer recycled content.Acid/Alkali ResistanceHydrotech is highly resistant to fertilisers, building washes and acid raindue to its inert clay content, unlike most other rubberised bitumenproducts which use various forms of inferior calcium carbonate filler.8www.alumascwaterproofing.co.uk