Hydrotech Brochure - Barbour Product Search

Application DetailsJoint — 1Hydrotech waterproofing to precast panel side jointFlex Flash UN uncured neoprene rubber reinforcementfully encapsulated in Hydrotech Monolithic Membrane 6125Hydrogard protection sheet, brush rolledinto the final coat75mmmin75mmminHydrotech structural waterproofing systemconsisting of two coats of HydrotechMonolithic Membrane 6125 incorporatingFlex Flash F polyester reinforcement fabricbetween both layersPrecast panels correctly aligned12mmmaxConcrete surface to be finished with a wood float,then primed with Alumasc Bitumen PrimerFlex Flash UN uncured neoprene rubber reinforcement fullyencapsulated in Hydrotech Monolithic Membrane 6125Hydrogard protection sheet, brush rolledinto the final coat75mmmin75mmminHydrotech structural waterproofing systemconsisting of two coats of HydrotechMonolithic Membrane 6125 incorporatingFlex Flash F polyester reinforcement fabricbetween both layersPrecast panels incorrectly aligned12mm maxConcrete surface to be finished with a wood float,then primed with Alumasc Bitumen PrimerJoint — 2Hydrotech waterproofing to general cracksHydrotech structural waterproofing systemconsisting of two coats of Hydrotech MonolithicMembrane 6125 incorporating Flex Flash F polyesterreinforcement fabric between both layersHydrogard protection sheet,brush rolled into the final coatFlex Flash UN uncured neoprene rubberreinforcement fully encapsulated inHydrotech Monolithic Membrane 6125Rough concrete and cracks up to1.5mmStructural cracks and shrinkage cracks over 1.5mmwide and less than 6mm wideConcrete surface to be finished with a wood float,then primed with Alumasc Bitumen Primer48www.alumascwaterproofing.co.uk