Sherwood Cot Instructions - Mamas & Papas

More documents

Recommendations

Info

ASTEP 1Insert four dowels (A)into the holes in the endsof the cots fixed side (1)top and bottom rails.Insert two dowels (A) intothe holes in the ends ofthe support rail (2).You may need to gentlytap the dowels intothe holes using a lighthammer.12CBSTEP 2Attach the two guides(B) to the front legs ofthe head (3) and foot (4)ends.Slot the guide screws (C)through the guides.Tighten the screws intothe ends as shown in thediagram.Important: Do not overtighten the screws. Theguides must turn freely.34--4--
I3DSTEP 3Screw the metal studs (D)into the metal inserts inthe front legs of the headend (3) and foot end (4)using the allen key (I).41STEP 4Attach the fixed side (1)to the cot ends.Screw four long bolts (E)through the side rails ofthe fixed side and into thecot ends using the allenkey (I).Important: Do not fullytighten the long bolts.EI--5--
Page 6 and 7: STEP 6 STEP 5Slot the dowels into t
Page 10 and 11: STEP 13Raising the drop sideStand i
Page 12: mamasandpapas.comMamas & PapasColne

Sherwood Cot Instructions - Mamas & Papas

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?