grimpeur 2500 - 3000 mc - Bargam UK

More documents

Recommendations

Info

Self-propelled for spraying (GRIMPEUR 2500 - 3000 MC)Booklet 2A332100021200.fmIDMSERVICE AND INTERIOR CAB LIGHT CONTROLSPos Symb. Name Function Symb. Indication1Adjustable air conditioningvents.Circulates the air throughoutthe cab.2 Cab top light. To light the operator’s seat.3 Air conditioning button4 Thermostat.To activate the airconditioning.To adjust the temperature ofthe air inside the cab.5 Fan switch. To activate the fan.671421Rear-view mirror adjustmentswitch.Rear-view mirror heatingswitch8 Windshield wiper switch118 73 51To adjust the position of therear-view mirrors.To activate the heating ofthe rear-view mirrorsTo activate the windshieldwiper116Use the switch (A) to turn thelight on and off.Press to activate anddeactivate the air conditioningTurn to increase or decreasethe temperature.Turn to activate anddeactivate the fan.Use it to adjust the position ofthe rear-view mirrors.Use to turn the mirrorheating on and offIDM-33210003400.tifUse to activate anddeactivate the windshieldwiper1123456789101112131415161718192021222324252627282930313233343536373839404142434445English- 32 -
Self-propelled for spraying (GRIMPEUR 2500 - 3000 MC)Booklet 2A1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253332100021200.fmIDMMACHINE START-UP AND MOVEMENTlever (C)batteryengaging key (A)switch (H)control (B)switch (G)ImportantAfter obtaining the necessary information, whenusing the machine for the first time, if necessary,the operator can simulate some manoeuvres to getused to the controls and their main functions,especially the starting and braking operations.To start the machine follow the procedure below.1 -Use key (A) to engage the batteries.2 -Check that the control (B) is in the central position"0".3 -Insert key (D) and turn clockwise (first section) topreheat glow plugs. Wait for 4÷5 seconds then turnthe key clockwise again to start the engine.4 -Push the lever (C) forward to increase the numberof engine revolutions.5 -Select the gear by means of lever (F) and switch(H).6 -Deactivate the parking brake with switch (G).7 -Use the control (B) to move the machine in one ofthe two directions.ImportantWhen the outside temperature is low and theengine cold, consult the engine operating manualbefore starting it.IDM-33210003500.tifignitionkey (D)lever (F)Do not try to start the machine for more than 15seconds. However, if the engine seems to be startingup, you may keep the ignition key turned for amaximum of 30 seconds.Wait at least one minute before two consecutiveengine start-up attempts; attempts should not be toofrequent in order to preserve the battery.In reverse gear and in high-risk conditions, thepresence of a co-worker is recommended in order tosignal dangers and obstacles that may not be visiblefrom the operator’s seat.ImportantDo not actuate the control too rapidly wheninverting the machine direction to avoid damagingthe hydrostatic components.Caution - PrecautionDrive safely taking all the operating conditions intoaccount. In particular, slow down on unevenground. Pay special attention when going roundbends in order not to impair the machine stability,especially when the tank is full.English- 33 -
Page 1: IMPORTANTKeep this service manual t
Page 4: General and safety informationBookl
Page 8: General and safety informationBookl
Page 11 and 12: Self-propelled for spraying (GRIMPE
Page 39: Self-propelled for spraying (GRIMPE
Page 91 and 92:
Self-propelled for spraying (GRIMPE
Page 93 and 94:
Page 95 and 96:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 113 and 114:
Booklet 2B1234567891011121314151617
Page 115 and 116:
Self-propelled sprayer (GRIMPEUR 25
Page 117 and 118:
Page 119 and 120:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134:
show all

grimpeur 2500 - 3000 mc - Bargam UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?