grimpeur 2500 - 3000 mc - Bargam UK

General and safety informationBooklet 1332113010101.fmIDMNever tamper, dodge, eliminate or by-pass the safetydevices installed on the machine. Neglect to respectthis requirement may cause serious risk to personalsafety and health.The staff in charge of carrying out any work on themachine during its entire life must have specialtechnical knowledge, particular skills and certifiedexperience in the specific sector. Neglect to observethese requirements may prove hazardous to personalsafety and health.Only wear and use the protective clothing and/ordevices indicated in the instructions provided by themanufacturer or work safety laws in force whenoperating the machine.Some phases may require the help of one or moreassistants. In these cases such persons should besuitably trained and informed on the type of activitybeing performed, so as not to cause damage to thehealth and safety of persons.Handling and loading specificationsHandling and loading must be carried out as per theinstructions on the packaging, on the equipment itselfand in the manufacturer's handbook.Handling, loading and unloading must be carried outby trained personnel with specific competence in thisfield. During manoeuvres while using the equipmentthe driver must be familiar with the proceduresnecessary to carry out these operations safely.The equipment may only be loaded onto andtransported by hoisting devices having sufficientcarrying capacity, anchored at the points specified bythe manufacturer.All moving and lifting operations must be carried out incompliance with the information supplied on thepackaging, on the machine and in the instructions foruse supplied by the manufacturer.The staff in charge of loading, unloading and movingthe machine must have skills and certified experiencein the specific sector. During manoeuvres, when usingthe machine directly, the operator must know theprocedures required to carry out these operations insafe conditions.Lifting and transportation must be carried out usingsuitable means and anchoring the machine in theplaces provided by the manufacturer. Personnel whoare authorised to perform these operations mustpossess specific skills and experience, to safeguardthemselves and others involved.Before moving the machine with vehicles, make surethat the machine and its components are suitablyanchored to the vehicle and that their volume does notexceed the maximum allowable values. Place therequired signals if necessary.It may be necessary to move the machine frequently.To avoid sudden, uncontrolled movement make surethat all parts which could cause this have been safelylocked before transportation.Approved equipment may be driven on public roads bya licensed driver. In any case, before startingtransportation, block the parts which could causesudden unexpected movements and check that thevolume does not exceed the maximum allowablevalues. If necessary, arrange proper signalling.Operation and use regulationsApart from being appropriately informed on the use of themachine, the operator must have the necessary skillsand knowledge to carry out the specific type work.Even after having been adequately trained on machineuse, perform trial manoeuvres to familiarise theoperator with machine controls and functions, start upand arrest in particular, on first use if necessary.Only use the machine for the purposes expresslyintended by the manufacturer. The improper use of themachine could place the personal safety and health ofthe staff at risk as well as cause economic damage.The machine has been designed and constructed tosatisfy all the operating conditions indicated by themanufacturer. Tampering with any device to achieveservices other than those provided may be hazardous topersonal safety and health and provoke economic loss.Do not use the machine if the safety devices are notperfectly installed or in perfect operating condition.Failure to comply with this requirement could place thepersonal safety and health of people at risk.During the preparation and use of all chemicals,appropriate measures must be taken in order to avoidplacing people’s health and safety at risk and harmingthe environment.All residual chemical substances must be disposed ofproperly according to local laws and regulations. Avoidpolluting the environment.Park the machine in an appropriate area where it doesnot create any obstacle or danger to circulation. Turnthe engine off and take adequate precautions toprevent unauthorised personnel from accessing thedriving seat.Do not allow unauthorised people to get close to theoperating area when the machine is being used. Ifnecessary cease operations immediately and have thearea at risk cleared.English- 4 -