grimpeur 2500 - 3000 mc - Bargam UK

More documents

Recommendations

Info

Self-propelled for spraying (GRIMPEUR 2500 - 3000 MC)Booklet 2A332100021200.fmIDMRECOMMENDATIONS FOR USETo treat the surface to be sprayed, we recommend youfollow the path indicated in the figure, keeping in mindthat the row marker foam tank identifies the previousareas covered.BIf the last time the machine covered a given area, thefull length of the bar (area (A)) was not necessary,deactivate one or more sectors.see leaflet 13Cover the areas (B-C) to complete the treatment of thesurface.A123456789101112131415161718192021222324252627282930313233343536373839404142434445CIDM-33211009600.tifEnglish- 36 -
Self-propelled for spraying (GRIMPEUR 2500 - 3000 MC)Booklet 2A1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253332100021200.fmIDMEXTENDED MACHINE DOWNTIMEIf the machine is not used for a long period of time,follow the procedure below:1 -Perform the general cleaning.2 -Grease the components provided with greaser.3 -Disconnect the batteries.4 -Store the machine in a well protected place withaccess reserved to authorised staff only.RECOMMISSIONINGBefore using the machine after a long period ofinactivity, carefully check that the main componentsare working correctly.In particular:1 -Check the battery conditions.2 -Check all levels (oil, water, fuel).3 -Check that the main fixing screws are tightened.4 -Check and replace worn or damaged parts.5 -Lubricate all greasing points.6 -Carry out all the necessary maintenanceoperations.5 -Apply an anti-rust treatment on all non-painted parts.6 -Check all the machine components and replacethem, if necessary.7 -Clean the water system thoroughly.8 -Drain the tanks containing the water and theproduct completely.9 -Remove the water system filters.7 -Replace or, if necessary, change the filters of thewater system.8 -Check the general conditions of the hydraulichoses.9 -Check the efficiency of all safety devices.10 -Carry out a general cleaning, with special care forthe operator’s seat and the control panel.11 -Check the pressure of the tyres.12 -Start the system, bring it to the maximum pressurelevel and check for any liquid leaks.English- 37 -
Page 1: IMPORTANTKeep this service manual t
Page 4: General and safety informationBookl
Page 8: General and safety informationBookl
Page 11 and 12: Self-propelled for spraying (GRIMPE
Page 43: Self-propelled for spraying (GRIMPE
Page 95 and 96:
Self-propelled for spraying (GRIMPE
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 113 and 114:
Booklet 2B1234567891011121314151617
Page 115 and 116:
Self-propelled sprayer (GRIMPEUR 25
Page 117 and 118:
Page 119 and 120:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134:
show all

grimpeur 2500 - 3000 mc - Bargam UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?