grimpeur 2500 - 3000 mc - Bargam UK

Self-propelled for spraying (GRIMPEUR 2500 - 3000 MC)Booklet 2A332100021200.fmIDMFIRST USEThe machine is delivered by themanufacturer in operating conditionafter it has been run in for a few hours.When using the machine for the firsttimes, the following indications mustbe complied with.1 -After a cold start, run the engine atlow speed for a few minutes.2 -Refer to the engine’s instructionmanual to run the machine inproperly.3 -Do not run the engine at maximumspeed for long periods of time.4 -Check all levels frequently.5 -Check that the hydraulic connections, bolts andnuts and wheel fixing screws are tightened.After the first 100 hours, change the filter cartridge (A).LUBRICATION POINTS DIAGRAMfilter cartridge (B)Lubricate all greasing points and all sliding surfacesusing waterproof grease, particularly after every highpressurewash.filter cartridge (A)IDM-33210004000.tifAfter the first 300 hours, change the engine oil andthe filter.If the machine is provided with an air hose, change thefilter (B) of the pump.ImportantTo identify all the lubricating points of theoperating units installed on the machine, see therelative leaflets.123456789101112131415161718192021222324252627282930313233343536373839404142434445IDM-33210004100.tifEnglish- 40 -