High-Performance Micro-D Connectors and Cables - Pan Pacific ...

Section HMicro-D Glass-Sealed Hermetic ConnectorsMicro-DHermeticproduct selection guideGlenair’s Hermetic Micro-D Connectors feature fusedglass insulators to provide an airtight seal. Theseconnectors are 100% tested to meet a maximum leakrate of 1 X 10 -8 cc's per second of helium.Matched Kovar ® Seal – The shells and contacts aremachined from Kovar ® , an iron-nickel-cobalt alloywhich forms a chemical bond with the vitreous glassinsulator. The contacts are gold-plated and the shellis nickel-plated.Choose Solder Cup, PC Tails or Pre-Wired intwo styles: panel mount for welding, soldering orbrazing, or o-ring mount.MWDM Weldmount/Soldermount HermeticThese Kovar ® alloy connectors are available in three styles:solder cup contacts, PC tail contacts or pre-wired and epoxysealed.Socket contacts are Kovar ® alloy with gold plating.These connectors can be front- or rear-panel mounted.Installation requires soldering, brazing or welding to thebulkhead. Helium leak rate is 1 X 10 -9 cc's per second.Weld Mount HermeticPC Tail ContactsPage G-5Weld Mount HermeticSolder Cup ContactsPage G-5HMWDM Hermetic for Rear-Panel MountingAvoid the expense of soldering or welding with this o-ring version.Blind tapped mounting holes and integral jackposts provideeasy installation. Three termination options are available:solder cup contacts for #26 AWG or smaller wire, PC tails forrigid or flexible circuit boards, or pre-wired with extended epoxyencapsulation to protect and insulate the solder joints.O-Ring HermeticPage G-7© 2011 Glenair, Inc. U.S. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comH-1E-Mail: sales@glenair.com