High-Performance Micro-D Connectors and Cables - Pan Pacific ...

Micro-DLatchingMicroStripsSeries 171 MicroStripsSingle Row Strips with Solder Cups171-001171-001-7PS-P1CLSingle Row Solder Cup MicroStripsThese .050" pitch single row solder cup microstrips accept #26 to #30 gagewire with standard contacts and up to size #24 wire with "large bore" contacts.Contacts are factory-installed and potted. Available with 1 to 30 contacts. Optionalstainless steel latching mechanism prevents de-mating. Guide pins provide circuitpolarization. Contacts are twistpin type and are gold-plated. Housing is moldedLCP thermoplastic. Suitable for high-reliability applications where long-termresistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C.How To Order Solder Cup MicrostripsSeriesNumber ofCavitiesContact Genderand Solder CupSizeOptionalGuidePinOptionalLatchOptionalMountingHoles171-001Single RowMicroStrip, .050"Contact Spacing,Solder Cup Contacts-1 to -30Total number ofcavities includingguide pins,latchesand mountingholes.PSPin Contacts, Size#26 Solder CupOmitFor No Guide Pin-P1Guide Pin in Cav. #1OmitFor No LatchCLCenter LatchOmitFor No MountingHolesMHMounting HolesThe number ofcavities equals thenumber of electricalcircuits plus 1cavity for eachguide pin and latch,plus 6 cavities forthe mounting holeoption.NSPin Contacts, Size#24 Solder CupSSSocket Contacts,Size #26 Solder Cup-PBGuide Pin at BothEnds-P(x)Replace (X) withguide pin location.P3 shown below:BLLatch at Both EndsThe three cavitieson each end arefilled with epoxy.Two .062" (1.57mm)holes are crossdrilledto allow forattachment to amounting surface.TSSocket Contacts,Size #24 Solder CupSample Part NumberQ171-001 - 7 PS - P1 CL© 2011 Glenair, Inc. U.S. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comQ-4E-Mail: sales@glenair.com