High-Performance Micro-D Connectors and Cables - Pan Pacific ...

Section BMicro-D Metal Shell Connectors forHarness ApplicationsMicro-DHarnessproduct selection guideMWDM Solder Cup ConnectorsAlways in stock, these connectors feature gold-plated soldercup contacts for termination to #24 through #30 AWG wire.Solder CupPage B-2BMWDM Pre-Wired ConnectorsThese connectors avoid the expense and workmanshipissues with soldering wires. Crimp terminations assureconsistent circuit resistance. Stocked in #26 AWG, availablein #24 gage to #30 gage wire.Pre-WiredPage B-4MWDM Back-To-Back Unshielded CablesIf a simple jumper cable is required, these cable assembliessimplify ordering. No special part numbers are necessary.Available in all sizes. Wiring is #1 to #1, etc. Back-to-backsare built to order in any length.Back-To-BackPage B-6MWDM Shielded Cable AssembliesFeaturing special Micro-D connectors with integral shieldattachment platforms and ground springs, these shieldedcable assemblies are terminated, tested and ready forimmediate use.ShieldedCablesPage B-8MWDM Uninsulated Wire PigtailsGold plated or solder dipped single strand uninsulated wirecan be used for a variety of termination techniques, includingwire bonding, flexible circuits and rigid boards.UninsulatedWirePage B-12GMDE Environmentally Sealed Panel MountGMDE connectors are special Micro-D connectors withO-rings for sealing to panels or bulkheads.EnvironmentalPage B-14© 2011 Glenair, Inc. U.S. CAGE Code 06324Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.comB-1E-Mail: sales@glenair.com