Gigaset N720 DECT IP Multicell System

Projecting the DECT networkPreliminary identification of the positions of the base stationsNow plan the positions of the base stations. Take the following into consideration:u The information you have collected regarding the requirements for the telephone networku Your synchronisation planningu The technical conditions for the wireless DECT.First create a plan in which you then enter the locations of the base stations. You can useexisting building and supply plans, if applicable. For very large buildings, you may be ableto work with partial floor plans and then merge the results of the measurements into theevaluation.Creating a planning drawingCreate a planning drawing from the information you have collected in the preliminaryexamination of the location. Enter building dimensions, hotspot areas and any sources ofinterference already identified.Examples:50 mHS30 mComputersWC/storeStairsHSu The numbers in the rooms reflect the required number of DECT telephones.u Areas with high-density traffic are marked as hotspots (HS).u The walls marked in bold are assumed to have a high absorption effect, or reflectionscan be expected.u The dotted lines on the two outer walls indicate tinted windows (coated with metalfilm).u The stairwell should be covered by DECT wireless transmission. There is a lift here.18VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299