Gigaset N720 DECT IP Multicell System

Taking measurementsEvaluating measurementsThe graphical display of your measurement results in the layout plan shows the overlapareas of the individually planned base stations.ADIn the example, limitation lines are drawn for the wireless coverage for base stations A andD. The overlap areas are very good for both stations; synchronisation is also guaranteedbetween A and D. However, the measurement results of the other stations must be usedto check whether a further base station is required in the shaded areas.¤ Using the measurement results (where necessary), define new positions for the basestations and check them with further measurements.Note that moving one installation location also influences the other measurementresults. Always consider how this affects the synchronisation of the base stations.¤ Enter the determined optimum installation locations for the base stations in the plan(including the height and special construction circumstances, if necessary). We recommendyou also document the assembly positions with photographs.¤ In particular, check rooms or areas with very high wireless signal shielding (e.g., lifts,reinforced concrete ceilings, etc.) and add further base stations to your plan wherenecessary.Once the measurements are complete and the positions of the base stations have beendefined, the telephone system can be installed. This is described in the user guide for theGigaset N720 IP PRO and Gigaset N720 DM PRO.RecommendationAfter installation and commissioning of the DECT network, the voice quality, roamingand handover should be checked again with the system telephones.28VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299