New - McFarlane Aviation Products

New!Push to Unlock ControlsPerfect for homebuilt or custom projects!• Quality stainless steel construction• Teflon lined conduit for smooth, consistent control• Heavy duty strength and long lifeUniversal Controls• Not for use on certified aircraft, flight controls or flight control trim tabs®MC6150 series: Order part number MC6150-071XXLLLwhere XX is the knob color code and LLL is the length in inches.• Solid wire end• Round Knob - Anodized aluminum in red, black, blue and clear (silver)or Chrome plated bronze (designed to match vintage controls)• Available in 4, 6, 8, 10 and 12 ft lengths• Teflon lined conduit for smooth, consistent control• May be trimmed to lengthMC6160 series: Order part number MC6160-071XXLLLwhere XX is the knob color code and LLL is the length in inches.• Solid wire end• Square black knob with a black or clear (silver) push-button• Available in 6, 8 and 12 foot lengths• May be trimmed to length• Teflon lined conduit for smooth, consistent control• Ideal for carburetor heat or alternate airMC6250 series: Order part number MC6250-XXLLLwhere XX is the knob color code and LLL is the length in inches.• 10-32 threaded push rod end• Round Knob - Anodized aluminum in red, black, blue and clear (silver)• Available in 4, 6, 8, 10 and 12 ft lengthsMC6350 series: Order part number MC6350-XXLLLwhere XX is the knob color code and LLL is the length in inches.• Dual solid wire ends• Round Knob - Anodized aluminum in red, black, blue and clear (silver)• Available in 4, 6, 8 and 12 foot lengths• Teflon lined conduit for smooth, consistent control• May be trimmed to lengthSpecifications:Travel (stroke): 3” minimumConduit (dual wire controls): 0.188 inch OD Teflon lined wound conduitConduit (single wire controls): 0.24 inch OD Teflon lined would conduit with a Teflon jacketMax Work Loads: Pull: ~25 lbs; Push: ~10 lbs*Minimum Locking Force (measured at the knob): 15 lbs tensile, 10 lbs compressionOperating Temp: -65 to 450 deg F (knob/housing assembly: -65 to 250 deg F)Panel Fitting: 7/16-20 thread*Max push load for solid wire end designs is dependent on wire diameter, length of trimmedwire (unsupported by conduit), geometry of wire rigging, and the actuator configuration.Custom Engraved Knobs:Custom engraved knobs are available for a small additional fee. Call for details.Knob/Color CodesCode DescriptionBB Black anodized aluminumRR Red anodized aluminumLL Blue anodized aluminumCC Clear (Silver) anodized aluminumCB Black anodized aluminum with Clear(Silver) push buttonHH Chrome plated brass knobOrder Online at www.mcfarlaneaviation.com or Call 888-750-5251 “MC” prefix denotes McFarlane Aviation, Inc. manufacture 17