®Universal ControlsTurn-to-Lock ControlsPerfect for homebuilt or custom projects!These versatile controls are ideal for many applications. They feature a turn-to-lockmechanism that requires a quarter turn of the knob to lock or unlock the control.• Quality stainless steel construction• Teflon lined conduit for smooth, consistent control• Wire end - may be trimmed to length• Multiple options: knob styles, inner wire size, length, dual or single wire/conduit• Longer lengths and other custom options available upon request• Not for use on certified aircraft, flight controls or flight control trim tabs<strong>New</strong>!MCTL1014D series: Order part number: MCTL1014DLLL-K,where LLL is the the length of the control in inches and -Kis a suffix indicating the style of knob indicated in the table:• Dual twisted wire ends: 1/16” diameter 7X7 Stainless Steel• ~ 30 lbs minimum locking force• Teflon lined conduit for smooth, consistent control• Available in 4, 6, 8 and 12 ft lengthsMCTL2254D series: Order part number: MCTL2254D072-K,where -K is a suffix indicating the style of knob indicatedin the table:• Dual wire ends: 0.071” diameter music wire• ~ 55 lbs minimum locking force• Teflon lined conduit for smooth, consistent control• 6 foot lengthMCTL1034 series: Order part number: MCTL1034-072-K,where -K is a suffix indicating the style of knob indicated in the table:• Single twisted wire end: 1/16” diameter 1X7 Stainless Steel• ~ 30 lbs minimum locking force• Teflon lined conduit for smooth, consistent control• 6 foot lengthMCTL2254 series: Order part number: MCTL2254-072-K,where -K is a suffix indicating the style of knob indicated in the table:• Single solid wire end: 0.071” diameter music wire• ~ 55 lbs minimum locking force• Teflon lined conduit for smooth, consistent control• 6 foot lengthKnob StyleSuffix (-K)-B BallKnob Style-F Fluted-T T-Handle-P 4-ProngSpecifications:-FLFluted, engravedTravel (stroke): 4.0” maximumConduit (dual wire controls): 0.188 inch OD Teflon lined wound conduitConduit (single wire controls): 0.25 inch OD Teflon lined would conduit with a Teflon jacket -TLT-Handle, engravedMax Work Loads: Pull: ~25 lbs; Push: ~10 lbs*Operating Temp: -65 to 450 deg F (knob/housing assembly: -65 to 250 deg F)Panel Fitting: 1/2-20 UNF thread*Push loads apply to controls with solid wire only and depend on wire diameter, length-PL4-Prong, engravedof trimmed wire (unsupported by conduit), geometry of wire rigging, and theactuator configuration.No knob18 Order Online at www.mcfarlaneaviation.com or Call 888-750-5251 “MC” prefix denotes <strong>McFarlane</strong> <strong>Aviation</strong>, Inc. manufacture
<strong>New</strong>!Controls for Rotax EnginesControls for Dual Carburetor 912/914 Series Rotax EnginesAllow a neat, clean installation without a clunky splitter box• Quality metal construction• Teflon lined conduit for smooth consistent control• Available in 4, 6, 8 and 12 foot lengths- Easily trimmed to length- Longer controls available upon request• Manufactured to the same quality standards as <strong>McFarlane</strong>’s FAA-PMA parts• Not for use on certified aircraft®MCT100D Series Panel Mount Throttle Controls• Super smooth friction lock• Versatile threaded conduit terminals for easy adjustment (M6x1 x 1.00 inch thread)• Adjustable cable stops to limit travel• Travel (stroke): 3.75” max• Conduit: 0.188 inch OD Teflon lined wound conduit for smooth consistent control• Inner Wire: Heavy duty 0.062 inch diameter, 1X7 stainless steel twisted wire.• Design work load: 10 lbs (pull only)• Typical locking force: 1 to 10 lbs (depends on friction lock engagement)• Operating temp: -65 to 450 F• Panel fitting: 1/2-20 UNF thread• Control length is measured from panel fitting to end of conduit, wires extend 6 inches beyond conduit.Order part number MCT100DLLL where LLL is the length in inches.Add a “-B” for a ball style knob instead of the standard knob.MCQ100D Series Quadrant Style Throttle ControlsThese controls feature the same high quality construction and smooth operation as our popular MCT100D series panel mountcontrols, but they are designed for use with a quadrant.• Convenient dual conduit clamp for simple mounting• Viton boot to dampen vibration and seal out dust on the quadrant end• Versatile threaded conduit terminals for easy adjustment (M6x1-6g x 1.00 inch thread)• Adjustable cable stops to limit travel• Travel (stroke): 4” max• Conduit: 0.188 inch OD Teflon lined wound conduit for smooth consistent control• Inner Wire: Heavy duty 0.062 inch diameter, 1X7 stainless steel twisted wire.• Design work load: 10 lbs (pull only)• Operating temp: -65 to 450 F• Pushrod thread (quadrant end): 10-32 UNF X 0.65 inch thread• Control length equals the conduit length, wires extend a minimum of 6 inches beyond the conduitOrder part number MCQ100DLLL where LLL is the length in inches.MCTL1014D Series Turn-to-Lock Choke ControlsThese controls feature a turn-to-lock mechanism that requires a quarter turn of theknob to lock or unlock the control at any position.• Travel (stroke): 4.0” max• Conduit: 0.188 inch OD Teflon lined wound conduit for smooth consistent control• Inner Wire: Heavy duty 0.062 inch diameter, 7X7 stainless steel twisted wire.• Design work load: 25 lbs (pull only)• Minimum locking force ~ 30 lbs• Operating temp: -65 to 450 F (knob housing assembly: -65 to 250 F)• Panel fitting: 1/2-20 UNF thread• Control length is measured from panel fitting to end of conduit, wires extend 6 inches beyond conduit.Order part number: MCTL1014DLLL-K, where LLL is the the length of thecontrol in inches and -K is a suffix indicating the style of knob indicated in the table on page 18:MCC101D Series Non-Locking Choke ControlsThese controls do not feature a locking mechanism, however they have aninternal elastomer seal to dampen vibration and provide a small amount ofresistance. If your choke installation features a return spring, this controlwill return to the closed position when released.• Travel (stroke): 3.5” max• Conduit: 0.188 inch OD Teflon lined wound conduit for smooth consistent control• Inner Wire: Flexible 0.062 inch diameter, 7X7 stainless steel twisted wire.Knob Style• Design work load: 25 lbs (pull only)Knob StyleSuffix (-K)• Operating temp: -65 to 450 F-RBRound, Black-RCRound, Clear (silver)• Panel fitting: 7/16-20 X 1.3” UNF thread-RLRound, Blue• Control length is measured from panel fitting to end of conduit, wires extends a -RRRound, Redminimum of 6 inches beyond the conduit.-RBC Round, Black, engraved with "Choke"Order part number: MCC101DLLL-K where LLL is the the length of the control in -RCC Round, Clear (silver), engraved with "Choke"-RLC Round, Blue, engraved with "Choke"inches and -K is a suffix indicating the style of knob indicated in the table:-RRC Round, Red, engraved with "Choke"No knobOrder Online at www.mcfarlaneaviation.com or Call 888-750-5251 “MC” prefix denotes <strong>McFarlane</strong> <strong>Aviation</strong>, Inc. manufacture 19