New - McFarlane Aviation Products

FAA-PMA Approved®Stabilator Trim Kits for Piper AircraftSave time and money with convenient kits!• Shafts and barrels manufactured by PMA Products, Inc.• Bearing manufactured by PiperModelPart NumberPA28-140, 150, 160, 180PSTAB-KT-1PA28-235PSTAB-KT-1PA28-151, 161, 181, 236PSTAB-KT-1PA28-201T S/N 28-7921001 to 28-7921095 PSTAB-KT-1PA28R-180, 200, 201, 201TPSTAB-KT-1PA32PSTAB-KT-1PA32RPSTAB-KT-1PA34-200 S/N 34-7350185 and upPSTAB-KT-2PA34-200TPSTAB-KT-2PA34-220TPSTAB-KT-2MiscellaneousNew!PSTAB-KT-1(1) CA65246-100 Trim Shaft (includes instructions and STC)(1) CA63530-100 Trim Barrel (includes instructions and STC)(2) 452-413 BearingTow Pin for Beechcraft AircraftPart Number RA60-820029-1PSTAB-KT-2(1) CA65246-002 Trim Shaft(1) CA96596-002 Trim Barrel(2) 452-413 BearingNew!Eligible model series:35-A33,35-B33,35-C33,35-C33A,E33,F33,G33,E33A,F33A,F33C,N35,P35,S35,V35,V35A,V35B,36,A36,A36TC,B36TC,95-55,95-A55,95-B55,95-C55,D55,E55,58,56TC,A56TC,58TC,58P,B60Manufactured by RapcoRA60-820029-1Stabilizer Jack Screw Actuator Kit for Cessna 180, 182 and 185 AircraftImproved Material for Extreme Corrosion ResistanceMcFarlane replaces the original steel components with duplex stainless steel (even better than Monel) components for a long lifeeven in a harsh saltwater environment.Improved BearingPrecision bearing reduces free play and features extra low temperature grease for easy turning at low temperatures.Improved Strength and ReliabilityThe original Cessna actuators use a 3/32” roll pin to attach the sprockets and retaining collars to the screw bars. These pins arecritical as the front of the stabilizer would detach from the airframe if they failed. Although the original roll pins are technicallystrong enough, due to the nature of roll pins, they are prone to unpredictable failure. This is especially true if they are bent ordamaged during installation. To provide a more robust design, McFarlane redesigned the sprocket and retaining collar to allow theuse of a 5/32” roll pin. This more than doubles the strength of the design.Convenient KitStabilizer jack-screw kit part number 1111 is an FAA-PMA/STC approved kit to replace all wear components for the stabilizeractuator assemblies for many Cessna 180, 180A-K, 182,182A-D, 185, 185A-E, A185E-F aircraft. It includes all parts required toreplace the following Cessna parts in both the left-hand and right-hand actuators:• 0310332 Sprocket• 0712500-11 Screw-Bar• 0712500-13 Barrel• 0712500-7 Collar-Retainer• 0712502 Bushing Eccentric• 0712500-10 Bushing• MS20201KP6A or AN201KP6A Bearing• NAS561-3-8 Roll Pin• 0432138-3 or S2295-25-185 Chain• 0712500-19 PlugComingSoon!Order Online at www.mcfarlaneaviation.com or Call 888-750-5251 “MC” prefix denotes McFarlane Aviation, Inc. manufacture 66