conduit systems for electrical wires and cables - drive-electric.hu

ANAMETALL-PLASTICCONDUITSSealtite CNP grey :All-plastic, robust, UL & CSAapproved (type A).Type CNP is very abrasion resistant and available for use atheavy circumstances and frequent movement. The CNP isalso perfectly suited for use on machines and installationsthat will be exported to countries outside Europe. Thistype of conduit is usually applied in rail-signalling-systems,trains, paper industry, steelworks and food industry.Material & Construction:Construction: Thick smooth thermoplastic (PVC compound)core, with braided nylon reinforcement and thicksmooth thermoplastic (PVC compound) cover.Cover specifications: PVC, lead-free according to RoHS,nylon reinforced, smoothbore in- and outside, sunlight andUV resistant, suitable for outside installation. The cover isresistant against oil and greases.Special approvals: UL- 1660, type A (fi le # E 75863) andCSA C22.2 (fi le # 15275).Temperature range: -20 ºC till +60 ºC, intermittent up to+80 ºC. For CSA -18 °C till +75 °C..Colour: Grey (orange is also available).Classification according NEN-EN-IEC 61386:Compression resistance: Class 1, Very light (125 N).Impact resistance: Class 3, Medium (2 J).Tensile strength: Class 4, Heavy (1000 N).Protection class: IP 67 (dustproof, watertight).Nylon reinforcedPVCCONDUITTYPE CNPGREYSealtite Diametre Bending radius Standard carton Small carton Reels WeightSize Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m)(Inch) (mm) (mm) (mm) (mm) Grey Grey Grey3/8” 12,6 19,4 70 100 76 313.012.1 - - - - 0.411/2” 16,1 23,4 90 125 60 313.016.1 - - - - 0,433/4” 21,0 29,5 115 160 53 313.020.1 - - - - 0,471” 26,5 36,3 170 200 30 313.026.1 - - - - 0,651.1/4” 35,1 46,0 200 240 15 313.035.1 - - - - 0,871.1/2” 40,7 52,4 230 290 15 313.040.1 - - - - -2” 52,4 66,6 260 350 15 313.050.1 - - - - -The fittings for Sealtite CNP are outlined onpages 8-04 and 8-05.Size SealtiteFittingsInchISOPGNPT- - 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” - - -- - M16 M20 M25 M32 M40 M50-M63 M63 - - -- - - - - - - - - - - -- - 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” - - -8-03