Sealtite HCI black:Robust, wide temperature range <strong>and</strong>extra corrosion resistant.If we look at wider temperature ranges Sealtite type HCIis a good solution. In addition type HCI has a stainlesssteel square-locked inner hose which guarantees a highcorrosion resistance. Type HCI can be used in areas wherestrong temperature changes occur <strong>and</strong> corrosion resistanceis needed <strong>and</strong> is among others, being applied in the foodindustry, trans<strong>for</strong>mers, off-shore, foundries, chemical <strong>and</strong>ceramics industry.Material & Construction:Construction: Stainless steel AISI-304, square-lockedwith cord packing, thick smooth thermoplastic cover (PVCcompound).From 1.1/2”a fully interlocke-profi le will be used.Also available with innercore in AISI-316 (see page 6-09type HCI 316).Cover specifications: PVC, lead-free according to RoHS,sunlight <strong>and</strong> UV resistant, suitable <strong>for</strong> outside installation.The cover is good resistant against oil <strong>and</strong> grease.Temperature: -45 ºC to +105 ºC, intermittent up to +120 ºC.Colour: Black.Classification according NEN-EN-IEC 61386:Compression resistance: Class 4, Heavy (1250 N).Impact resistance: Class 4, Heavy (6 J).Tensile strength: Class 4, Heavy (1000 N).Protection class: IP 67 (dust-proof, water-tight).Square lockedANACONDASEALTITE ®SPECIALSealtite Diametre Bending radius St<strong>and</strong>ard carton Small carton Reels WeightSize Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m)(Inch) (mm) (mm) (mm) (mm) Black Black Black1/4” 6,4 11,5 40 50 50 318.006.1 - - - - 0,25/16” 10,1 14,4 50 65 50 318.010.1 10 318.010.3 - - 0,23/8” 12,6 17,8 60 85 75 318.012.1 10 318.012.3 - - 0,31/2” 16,0 21,1 75 110 60 318.016.1 10 318.016.3 - - 0,43/4” 21,0 26,4 90 140 50 318.020.1 10 318.020.3 - - 0,61” 26,5 33,1 120 170 30 318.026.1 10 318.026.3 - - 0,81.1/4” 35,1 41,8 135 215 30 318.035.1 10 318.035.3 - - 1,11.1/2” 40,3 47,8 165 250 15 318.040.1* - - - - 1,12” 51,6 59,9 210 300 15 318.050.1* - - - - 1,1* Conduits types HCI 1.1/2” <strong>and</strong> 2” are only available on request..CONDUITTYPE HCIBLACKThe stainless steel fi ttings <strong>for</strong> Sealtite areoutlined on pages 6-05 till 6-08.Also the st<strong>and</strong>ard nickel plated brass fittingscan be used (see chapter 4).Size SealtiteFittingsInchISOPGNPT1/4” 5/16” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”M12-M16 M16-M20 M16-M20 M20 M25 M32 M40 M50 M63 M75 M90 M1057 9 - 11 11 - 13,5 16 21 29 36 42 48 - - -- - 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”6-02
ANACONDASEALTITE ®SPECIALSealtite HFI black:Robust, halogen-free, very fl exible,chemical resistant, good fl ame properties<strong>and</strong> extra corrosion resistant.A halogen-free <strong>conduit</strong> <strong>for</strong> use in public areas. The featuresof the HFX cover are necessary in the fi eld of environment<strong>and</strong> safety, as the European guidelines state that certainareas need to be free of halogens. The HFI has two uniquefeatures, that it is extremely fl exible at both high as lowtemperatures <strong>and</strong> extra corrosion resistant because of thestainless steel inner hose. This makes the HFI very suitable<strong>for</strong> installations in the chemical <strong>and</strong> food-processing industry,but also in the off-shore, tunnels, train- <strong>and</strong> bus-buildingindustry, in closed areas, airports <strong>and</strong> (subway) stations,shipbuilding industry <strong>and</strong> navy. Type HFI is the solution<strong>for</strong> the combination of chemical resistance, absence ofhalogens <strong>and</strong> high corrosion resistance.Material & Construction:Construction: Stainless steel (AISI-304) core, squarelockedwith cord packing, thick smooth thermoplastic cover(Polyurethane).Cover specifications: Polyurethane, lead-free accordingto RoHS, sunlight <strong>and</strong> UV resistant, suitable <strong>for</strong> outsideinstallation. The cover is resistant against oil <strong>and</strong> grease.Special approvals: Flame properties according toNF F 16-101.Temperature: -55 ºC to +105 ºC, intermittent up to +125 ºC.Colour: Black.Classification according NEN-EN-IEC 61386:Compression resistance: Class 4, Heavy (1250 N).Impact resistance: Class 4, Heavy (6 J).Tensile strength: Class 4, Heavy (1000 N).Protection class: IP 67 (dust-proof, water-tight).Square lockedCONDUITTYPE HFIBLACKSealtite Diametre Bending radius St<strong>and</strong>ard carton Small carton Reels WeightSize Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m)(Inch) (mm) (mm) (mm) (mm) Black Black Black1/4” 6,4 11,5 40 50 30 333.006.1 - - - - 0,25/16” 10,1 14,4 50 65 30 333.010.1 10 333.010.3 - - 0,23/8” 12,6 17,8 60 85 30 333.012.1 10 333.012.3 - - 0,31/2” 16,0 21,1 75 110 30 333.016.1 10 333.016.3 - - 0,43/4” 21,0 26,4 90 140 30 333.020.1 10 333.020.3 - - 0,61” 26,5 33,1 120 170 30 333.026.1 10 333.026.3 - - 0,81.1/4” 35,1 41,8 135 215 15 333.035.1 - - - - 1,1The stainless steel fi ttings <strong>for</strong> Sealtite areoutlined on pages 6-05 till 6-08.Also the st<strong>and</strong>ard nickel plated brass fittingscan be used (see chapter 4).Size SealtiteFittingsInchISOPGNPT1/4” 5/16” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”M12-M16 M16-M20 M16-M20 M20 M25 M32 M40 M50 M63 M75 M90 M1057 9 - 11 11 - 13,5 16 21 29 36 42 48 - - -- - 1/2” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”6-03
- Page 1:
CONDUIT SYSTEMSFOR ELECTRICAL WIRES
- Page 6 and 7:
Plastic conduit selection table.All
- Page 8 and 9:
Company profileAnamet Europe BV is
- Page 10 and 11:
CONDUIT SYSTEMSFOR ELECTRICAL WIRES
- Page 12 and 13:
Multiflex SL:Flexible, simple & qui
- Page 14 and 15:
Anaconda nickel plated brass fittin
- Page 16 and 17:
Pg straight fitting, male, nickel p
- Page 18 and 19:
Anaconda nickel plated brass fittin
- Page 20 and 21:
Anaconda nickel plated brass fittin
- Page 22 and 23:
Multiflex UIG:Mechanically strong &
- Page 24 and 25:
Anaconda nickel plated brass fittin
- Page 26 and 27:
ABISO cable-hose fitting, male, nic
- Page 28 and 29:
ABNPT straight fitting, male, nicke
- Page 30 and 31:
ISO 90° fitting, male, stainless s
- Page 33 and 34:
Multiflex UI-CAP:Small bore, mechan
- Page 35 and 36:
Anamet nickel plated brass fittings
- Page 37 and 38:
Multiflex RWA:UL approved tubing, l
- Page 39 and 40:
Conduit connector, zinc die cast.Th
- Page 41 and 42:
ANAFLEX ® -CLICK:Quick mounting, r
- Page 43 and 44:
Conduit selection table Anamet Mult
- Page 45 and 46: Multitite FCD black:Light and flexi
- Page 47 and 48: Pg straight fitting, fixed, male, n
- Page 49 and 50: Multitite FCD-EF black:Extra flexib
- Page 51 and 52: Anaconda IP 68 nickel plated brassf
- Page 53 and 54: Pg 90° fitting, male, nickel plate
- Page 55 and 56: Conduit selection table Anaconda Se
- Page 57: Sealtite EF-M black:Medium mechanic
- Page 63 and 64: Sealtite HFX black:Robust, halogen-
- Page 65 and 66: Sealtite HTDL black:Robust, UL & CS
- Page 67 and 68: Overview table Anaconda Sealtite Sp
- Page 69 and 70: Fitting selection table Anaconda /
- Page 71 and 72: ISO straight fitting, female, nicke
- Page 73 and 74: Pg straight fitting, female, nickel
- Page 75 and 76: NPT 45° fitting, male, nickel plat
- Page 77 and 78: Lock nuts, nickel plated brass, Pg.
- Page 79 and 80: NPT / Pg adapter, nickel plated bra
- Page 81 and 82: Anamet galvanised steel fi ttings f
- Page 83 and 84: NPT 45° fitting, male, galvanised
- Page 85 and 86: Wire mesh, strain relief.Thread Sea
- Page 87 and 88: Fitting selection table Anaconda sp
- Page 89 and 90: ABPower connector adapter for Multi
- Page 91 and 92: ANACONDASPECIALFITTINGSAnaconda ada
- Page 93 and 94: Adapter for various makes old versi
- Page 95: Overview table Anaconda Sealtite Sp
- Page 99 and 100: Anaconda stainless steel fittings f
- Page 101 and 102: ABNPT straight fitting, male, stain
- Page 103 and 104: Sealtite HCI 316 black:Robust, wide
- Page 105 and 106: NPT 90° fitting, male, stainless s
- Page 107 and 108: Anamet aluminium fittings forSealti
- Page 109 and 110: Sealtite FG white:Robust, food grad
- Page 111 and 112: Anaconda stainless steel “food fi
- Page 113 and 114: ANACONDASEALTITE ®SPECIALCONDUITTY
- Page 115 and 116: Description Anaconda ATEX cable-hos
- Page 119 and 120: For unarmoured cables, IEC- ATEX ce
- Page 121 and 122: For armoured cables, IEC-ATEX certi
- Page 123 and 124: For unarmoured cables, IEC-ATEX cer
- Page 125 and 126: For armoured cables, IEC-ATEX certi
- Page 127 and 128: NPT 45° elbow fitting, male, nicke
- Page 129 and 130: Conduit selection table Anamet All-
- Page 131 and 132: ANAMETALL-PLASTICCONDUITSSealtite C
- Page 133 and 134: Anaconda stainless steel fittings f
- Page 135 and 136: Sealtite NMSF grey:All-plastic, med
- Page 137 and 138: ABISO straight fitting, male, plast
- Page 139 and 140: ANAMETALL-PLASTICCONDUITSAnamet MPC
- Page 141 and 142: Anamet plastic fittings for Anametp
- Page 143 and 144: Anamet nickel plated brass fittings
- Page 145 and 146: Overview table Ana-Quick Profi.Ana-
- Page 147 and 148:
ANA-QUICKPROFIAna-Quick Profi PA6S
- Page 149 and 150:
ANA-QUICKPROFIAna-Quick Profi PA6SU
- Page 151 and 152:
ANA-QUICKPROFIAna-Quick Profi PA12S
- Page 153 and 154:
ANA-QUICKPROFIANA-QUICK PROFI PA6 D
- Page 155 and 156:
ANA-QUICKPROFIANA-QUICK PROFI PP-UV
- Page 157 and 158:
ISO straight cable-hose fitting, ma
- Page 159 and 160:
Pg 90° elbow fitting, male, PA6, c
- Page 161 and 162:
Conduit holder, PA6, colour Black.A
- Page 163 and 164:
T - joint, conduit at outside conne
- Page 165 and 166:
ISO / ISO enlarger, glassfiber rein
- Page 167 and 168:
ANA-QUICKPROFIAna-Quick GIGANT PA6:
- Page 169 and 170:
ANA-QUICKPROFIAna-Quick GIGANT PUR
- Page 171 and 172:
Gigant, conduit connector, grey, PA
- Page 173 and 174:
Product selection table Anamet heat
- Page 175 and 176:
Hiprojacket ® Aero:Braided sleevin
- Page 177 and 178:
Anaconda nickel plated brass fittin
- Page 179 and 180:
ANAMET HEATPROTECTIONPRODUCTSHiprob
- Page 181 and 182:
Hiproblanket Wrap L:Blanket from wo
- Page 183 and 184:
ANAMET HEATPROTECTIONPRODUCTSHiprot
- Page 185 and 186:
ANAMET HEATPROTECTIONPRODUCTSThermo
- Page 187 and 188:
Thermojacket R:Braided sleeving fro
- Page 189 and 190:
INSTALLATION INSTRUCTION ANACONDA F
- Page 191 and 192:
ANACONDA stainless steel fittings,
- Page 193 and 194:
CHEMICAL RESISTANCEPolyurethane Cov
- Page 195 and 196:
Legend:+ = Resistant.0 = Conditiona
- Page 197 and 198:
PART NUMBERAND PAGEREFERENCETABLEP/
- Page 199:
PART NUMBERAND PAGEREFERENCETABLEP/
- Page 202 and 203:
P/n Page P/n Page P/n Page P/n Page
- Page 204:
ANAMET EUROPE B.V.Transformatorweg