Ana-Quick Profi PA6L black:Light model, <strong>for</strong> light <strong>and</strong> mediummechanical strength.The PA6L is applicable <strong>for</strong> st<strong>and</strong>ard circumstances <strong>and</strong> <strong>for</strong>frequent movements. The PA6L is used in light machines<strong>and</strong> installations in the machine- <strong>and</strong> equipment-building<strong>and</strong> in the transportation area.Material & Construction:Construction: Corrugated <strong>conduit</strong> from modifi ed polyamidePA6, UV resistant, halogen-free.Flame properties: Flame-retarding UL-94 HB.Resistant against: Alcohol, grease, fuels, mineral oils,weak bases <strong>and</strong> weak acids.Temperature range: -40 ºC till +120 ºC, intermittent up to+150 ºC.Colour : Black.Classification according NEN-EN-IEC 61386:Compression resistance: Class 1, Very Light (125 N).Impact resistance: Class 1, Very Light (0,5 J).Tensile strength: Class 1, Very Light (100 N).Protection class: IP 67 (dust-proof, water-tight).Normal profi le“thin wall”ANA-QUICKPROFIAna-Quick Diametre Bending radius St<strong>and</strong>ard carton Small carton Reels WeightSize Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m)DN (mm) (mm) (mm) (mm) Black Black Black7,5 6,7 10,0 11 33 50 801.107.0 - - 5000 801.107.5 0,0210 10,1 13,2 18 54 50 801.110.0 - - 3000 801.110.5 0,0212 12,5 15,7 26 78 50 801.112.0 - - 2200 801.112.5 0,0317 17,0 21,2 40 120 50 801.117.0 - - 1100 801.117.5 0,0423 23,5 28,4 50 150 50 801.123.0 - - 650 801.123.5 0,0629 29,4 34,5 60 180 25 801.129.0 - - 450 801.129.5 0,0937 36,7 42,2 80 240 25 801.136.0 - - 250 801.136.5 0,1250 48,1 54,0 90 270 25 801.148.0 - - 150 801.148.5 0,16* Also available in slitted execution (Article number 801.xxx.7 <strong>for</strong> st<strong>and</strong>ard cartons).CONDUITTYPE PA6LBLACKThe fittings <strong>for</strong> Ana-Quick Profi are outlinedin this chapter on pages 9-12 till 9-22.Ana-Quick ProfiFittingsDNISOPGNPT7,5 10 12 17 23 29 37 50M12 M12 - M16 M16 - M20 M20 - M25 M25 M32 M40 M50 - M637 7 - 9 - 11 11 - 13,5 13,5 - 16 21 29 36 48- - - - - - - -9-02
ANA-QUICKPROFIAna-Quick Profi PA6S black:St<strong>and</strong>ard model, <strong>for</strong> medium <strong>and</strong> highmechanical strength.The PA6S is applicable <strong>for</strong> st<strong>and</strong>ard circumstances <strong>and</strong><strong>for</strong> frequent movements. The PA6S is used in medium<strong>and</strong> heavy machines, in hospital-building, packagingmachines<strong>and</strong> the transportation area. Because the PA6Sis “UL-Recognized”, it is also used <strong>for</strong> export to countriesoutside Europe.Material & Construction:Construction: Corrugated <strong>conduit</strong> from modifi ed polyamidePA6, UV resistant, halogen-free.Flame properties: Flame-retarding UL-94 HB.Resistant against: Alcohol, grease, fuels, mineral oils,weak bases <strong>and</strong> weak acids.Temperature range: -40 ºC till +120 ºC, intermittent up to+150 ºC.Colour: Black (Grey is also available).Classification according NEN-EN-IEC 61386:Compression resistance: Class 2, Light (320 N).Impact resistance: Class 2, Light (1 J).Tensile strength: Class 2, Light (250 N).Protection class: IP 67 (dust-proof, water-tight).Normal profi le“st<strong>and</strong>ard wall”CONDUITTYPE PA6SBLACKAna-Quick Diametre Bending radius St<strong>and</strong>ard carton Small carton Reels WeightSize Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m)DN (mm) (mm) (mm) (mm) Black Black Black4,5 5,0 7,1 10 28 100 801.305.0 - - 9000 801.305.5 0,017,5 6,7 10,0 13 39 50 801.307.0 - - 5000 801.307.5 0,0210 9,9 13,0 20 60 50 801.310.0 - - 3000 801.310.5 0,0312 12,2 15,7 30 90 50 801.312.0 - - 2200 801.312.5 0,0317 16,6 21,2 45 135 50 801.317.0 - - 1100 801.317.5 0,0623 23,2 28,9 55 165 50 801.323.0 - - 650 801.323.5 0,0929 29,0 34,5 65 195 25 801.329.0 - - 450 801.329.5 0,1237 36,0 42,4 90 270 25 801.336.0 - - 250 801.336.5 0,1750 47,7 54,0 100 300 25 801.348.0 - - 150 801.348.5 0,23The fittings <strong>for</strong> Ana-Quick Profi are outlinedin this chapter on pages 9-12 till 9-22.Ana-Quick ProfiFittingsDNISOPGNPT7,5 10 12 17 23 29 37 50M12 M12 - M16 M16 - M20 M20 - M25 M25 M32 M40 M50 - M637 7 - 9 - 11 11 - 13,5 13,5 - 16 21 29 36 48- - - - - - - -9-03
- Page 1:
CONDUIT SYSTEMSFOR ELECTRICAL WIRES
- Page 6 and 7:
Plastic conduit selection table.All
- Page 8 and 9:
Company profileAnamet Europe BV is
- Page 10 and 11:
CONDUIT SYSTEMSFOR ELECTRICAL WIRES
- Page 12 and 13:
Multiflex SL:Flexible, simple & qui
- Page 14 and 15:
Anaconda nickel plated brass fittin
- Page 16 and 17:
Pg straight fitting, male, nickel p
- Page 18 and 19:
Anaconda nickel plated brass fittin
- Page 20 and 21:
Anaconda nickel plated brass fittin
- Page 22 and 23:
Multiflex UIG:Mechanically strong &
- Page 24 and 25:
Anaconda nickel plated brass fittin
- Page 26 and 27:
ABISO cable-hose fitting, male, nic
- Page 28 and 29:
ABNPT straight fitting, male, nicke
- Page 30 and 31:
ISO 90° fitting, male, stainless s
- Page 33 and 34:
Multiflex UI-CAP:Small bore, mechan
- Page 35 and 36:
Anamet nickel plated brass fittings
- Page 37 and 38:
Multiflex RWA:UL approved tubing, l
- Page 39 and 40:
Conduit connector, zinc die cast.Th
- Page 41 and 42:
ANAFLEX ® -CLICK:Quick mounting, r
- Page 43 and 44:
Conduit selection table Anamet Mult
- Page 45 and 46:
Multitite FCD black:Light and flexi
- Page 47 and 48:
Pg straight fitting, fixed, male, n
- Page 49 and 50:
Multitite FCD-EF black:Extra flexib
- Page 51 and 52:
Anaconda IP 68 nickel plated brassf
- Page 53 and 54:
Pg 90° fitting, male, nickel plate
- Page 55 and 56:
Conduit selection table Anaconda Se
- Page 57:
Sealtite EF-M black:Medium mechanic
- Page 63 and 64:
Sealtite HFX black:Robust, halogen-
- Page 65 and 66:
Sealtite HTDL black:Robust, UL & CS
- Page 67 and 68:
Overview table Anaconda Sealtite Sp
- Page 69 and 70:
Fitting selection table Anaconda /
- Page 71 and 72:
ISO straight fitting, female, nicke
- Page 73 and 74:
Pg straight fitting, female, nickel
- Page 75 and 76:
NPT 45° fitting, male, nickel plat
- Page 77 and 78:
Lock nuts, nickel plated brass, Pg.
- Page 79 and 80:
NPT / Pg adapter, nickel plated bra
- Page 81 and 82:
Anamet galvanised steel fi ttings f
- Page 83 and 84:
NPT 45° fitting, male, galvanised
- Page 85 and 86:
Wire mesh, strain relief.Thread Sea
- Page 87 and 88:
Fitting selection table Anaconda sp
- Page 89 and 90:
ABPower connector adapter for Multi
- Page 91 and 92:
ANACONDASPECIALFITTINGSAnaconda ada
- Page 93 and 94:
Adapter for various makes old versi
- Page 95 and 96: Overview table Anaconda Sealtite Sp
- Page 97 and 98: ANACONDASEALTITE ®SPECIALSealtite
- Page 99 and 100: Anaconda stainless steel fittings f
- Page 101 and 102: ABNPT straight fitting, male, stain
- Page 103 and 104: Sealtite HCI 316 black:Robust, wide
- Page 105 and 106: NPT 90° fitting, male, stainless s
- Page 107 and 108: Anamet aluminium fittings forSealti
- Page 109 and 110: Sealtite FG white:Robust, food grad
- Page 111 and 112: Anaconda stainless steel “food fi
- Page 113 and 114: ANACONDASEALTITE ®SPECIALCONDUITTY
- Page 115 and 116: Description Anaconda ATEX cable-hos
- Page 119 and 120: For unarmoured cables, IEC- ATEX ce
- Page 121 and 122: For armoured cables, IEC-ATEX certi
- Page 123 and 124: For unarmoured cables, IEC-ATEX cer
- Page 125 and 126: For armoured cables, IEC-ATEX certi
- Page 127 and 128: NPT 45° elbow fitting, male, nicke
- Page 129 and 130: Conduit selection table Anamet All-
- Page 131 and 132: ANAMETALL-PLASTICCONDUITSSealtite C
- Page 133 and 134: Anaconda stainless steel fittings f
- Page 135 and 136: Sealtite NMSF grey:All-plastic, med
- Page 137 and 138: ABISO straight fitting, male, plast
- Page 139 and 140: ANAMETALL-PLASTICCONDUITSAnamet MPC
- Page 141 and 142: Anamet plastic fittings for Anametp
- Page 143 and 144: Anamet nickel plated brass fittings
- Page 145: Overview table Ana-Quick Profi.Ana-
- Page 149 and 150: ANA-QUICKPROFIAna-Quick Profi PA6SU
- Page 151 and 152: ANA-QUICKPROFIAna-Quick Profi PA12S
- Page 153 and 154: ANA-QUICKPROFIANA-QUICK PROFI PA6 D
- Page 155 and 156: ANA-QUICKPROFIANA-QUICK PROFI PP-UV
- Page 157 and 158: ISO straight cable-hose fitting, ma
- Page 159 and 160: Pg 90° elbow fitting, male, PA6, c
- Page 161 and 162: Conduit holder, PA6, colour Black.A
- Page 163 and 164: T - joint, conduit at outside conne
- Page 165 and 166: ISO / ISO enlarger, glassfiber rein
- Page 167 and 168: ANA-QUICKPROFIAna-Quick GIGANT PA6:
- Page 169 and 170: ANA-QUICKPROFIAna-Quick GIGANT PUR
- Page 171 and 172: Gigant, conduit connector, grey, PA
- Page 173 and 174: Product selection table Anamet heat
- Page 175 and 176: Hiprojacket ® Aero:Braided sleevin
- Page 177 and 178: Anaconda nickel plated brass fittin
- Page 179 and 180: ANAMET HEATPROTECTIONPRODUCTSHiprob
- Page 181 and 182: Hiproblanket Wrap L:Blanket from wo
- Page 183 and 184: ANAMET HEATPROTECTIONPRODUCTSHiprot
- Page 185 and 186: ANAMET HEATPROTECTIONPRODUCTSThermo
- Page 187 and 188: Thermojacket R:Braided sleeving fro
- Page 189 and 190: INSTALLATION INSTRUCTION ANACONDA F
- Page 191 and 192: ANACONDA stainless steel fittings,
- Page 193 and 194: CHEMICAL RESISTANCEPolyurethane Cov
- Page 195 and 196: Legend:+ = Resistant.0 = Conditiona
- Page 197 and 198:
PART NUMBERAND PAGEREFERENCETABLEP/
- Page 199:
PART NUMBERAND PAGEREFERENCETABLEP/
- Page 202 and 203:
P/n Page P/n Page P/n Page P/n Page
- Page 204:
ANAMET EUROPE B.V.Transformatorweg