Operator Manual - Barrett BORS - NIOA LEM

1. From a steady rest, position thehorizontal crosshairs atthe top orbottom of the referencee object. Pressthebutton to selectthe height ofthe reference object. “ MEASUREETRGT USING ELEV” will be displayed.Figure 3-18Figure 3-172. Using the BORS elevation knob,move the horizontal crosshaireither from the top of the referenceeobject to its bottom, or from thebottom of theobject to its top asillustrated in Figure 3-18.NOTEThe measurement will be most accurate when the rifle is kept steadythroughoutthe procedure.3. Press the button todisplay therange to the reference object. Thedistance to the reference object willbe displayedd as “TARGET RANGE1012 YARDS” as illustrated in Figure3-19.Figure 3-194. Press the button to return to the “OPERATOR’S SCREEN”. Use theBORS elevation knob to dial the eference object’s range. Your riflescopeelevation crosshairs arenow adjusted so that your point of aim is the point ofimpact at thereferencee object’s calculated range.23