11.07.2015 Views

Rolls-Royce Remote Oil Filler Valve Bulletin - Code7700

Rolls-Royce Remote Oil Filler Valve Bulletin - Code7700

Rolls-Royce Remote Oil Filler Valve Bulletin - Code7700

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

G. Install the new ROFV (79-11-01, 03-100), P/N 237-0263-03 on the mountingadapter at the rear face of the oil tank (Refer to Figure 1)(1) Remove all protective covers, blanks or caps from the ROFV (79-11-01,03-100).Printed in Great Britain(2) Clean the mating surfaces of the ROFV (79-11-01, 03-100) and the mountingadapter.(3) Lubricate and install a new seal ring (79-11-01, 03-095), P/N AS43013-218on the ROFV (79-11-01, 03-100).(4) Put and hold the new ROFV (79-11-01, 03-100), P/N 237-0263-03 in positionon the mounting adapter.(5) Install the four bolts (79-11-01, 03-102) and the four washers (79-11-01,03-104) that attach the ROFV (79-11-01, 03-100) to the mounting adapter.(6) Torque the four bolts (79-11-01, 03-102) to 11,5 Nm (100 lbf in.).(7) Install the union nut (3) that attaches the pressure fill tube (4) to theROFV (79-11-01, 03-100).(8) Torque the union nut (3) of the pressure fill tube (4) to between 35,6 and39 Nm (315 and 345 lbf in.).(9) Install the union nut (5) that attaches the overflow tube (6) to the ROFV(79-11-01, 03-100).(10) Torque the union nut (5) of the overflow tube (6) to between 53,1 and 58,7Nm (470 and 520 lbf in.).H. Install the breather tube (79-11-01, 03-170) between the oil tank emergencyfill adapter (79-11-01, 03-180) and the ROFV (79-11-01, 03-100) (Refer toFigure 1)(1) Remove all protective covers, blanks or caps from the breather tube(79-11-01, 03-170) and the oil tank emergency fill adapter (79-11-01,03-180).(2) Put and hold the breather tube (79-11-01, 03-170) in position between theoil tank emergency fill adapter (79-11-01, 03-180) and the ROFV (79-11-01,03-100)(a) The breather tube (79-11-01, 03-170) is identified with the twomarkings 'TANK' and 'VALVE' on its outer skin. Install the end of thebreather tube (79-11-01, 03-170) identified with the marking 'TANK' onthe oil tank emergency fill adapter (79-11-01, 03-180). Install theother end of the breather tube (79-11-01, 03-170) identified with themarking 'VALVE' on the ROFV (79-11-01, 03-100).Jul.14/06Jul.14/06TAY−79−1698Page 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!