Rolls-Royce Remote Oil Filler Valve Bulletin - Code7700

S. Remove the old ROFV (79-11-01, 03-100), P/N 237-0263-02 that is installed onthe mounting adapter at the rear face of the oil tank (Refer to Figure 1)(1) Put a clean oil resistant container in position below the ROFV (79-11-01,03-100) to catch the drained oil.Printed in Great Britain(2) Remove the four bolts (79-11-01, 03-102) and the four washers (79-11-01,03-104) that attach the ROFV (79-11-01, 03-100) to the mounting adapter.(3) Remove the old ROFV (79-11-01, 03-100), P/N 237-0263-02 together with theused seal ring (79-11-01, 03-095), P/N AS43013-218 from the mountingadapter.(4) Move the container with the drained oil away from the engine and discardthe drained oil.T. Install the new ROFV (79-11-01, 03-100), P/N 237-0263-03 on the mountingadapter at the rear face of the oil tank (Refer to Figure 1)(1) Remove the applicable covers, blanks or caps from the ROFV (79-11-01,03-100).(2) Clean the mating surfaces of the ROFV (79-11-01, 03-100) and the mountingadapter.(3) Lubricate and install a new seal ring (79-11-01, 03-095), P/N AS43013-218on the ROFV (79-11-01, 03-100).(4) Put and hold the new ROFV (79-11-01, 03-100), P/N 237-0263-03 in positionon the mounting adapter.(5) Install the four bolts (79-11-01, 03-102) and the four washers (79-11-01,03-104) that attach the ROFV (79-11-01, 03-100) to the mounting adapter.(6) Torque the four bolts (79-11-01, 03-102) to 11,5 Nm (100 lbf in.).Jul.14/06Jul.14/06TAY−79−1698Page 13