DocuPrint P205 b User Guide - Fuji Xerox Printers

Resetting to Factory DefaultsAfter executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset totheir factory default values.1 Turn off the printer.2 Open the rear cover.3 While holding down the button on the operator panel, turn on the printer.Ensure that the (Ready) LED and (Error) LED blink. If the LEDs do not blink, turn off theprinter, and then execute step 3 again.4 Close the rear cover.The printer starts initializing the Non-Volatile Memory (NVM).IMPORTANT:• Never attempt to turn off the printer. The printer will cease to function.The printer restarts automatically to apply the settings.Using the Operator Panel 92