Chapter 7 - Veterinary Instrumentation

7 TRAUMA IMPLANTS & INSTRUMENTSReconstruction Plate PliersReconstruction Plate PliersRECONSTRUCTION PLATE PLIERS001284A Reconstruction Plate Pliers for 2.7 plates 280mm £175.00001284 Reconstruction Plate Pliers for 3.5 plates 290mm £175.00Plate Bending Pliers - Roller Type001283 Roller Type Plate Bending PliersBONE PLATE PRESSPlate BendingTips on the use of the plate press• The press works at maximum efficiency when the handle isapproximately parallel with the base.• Place the plate to be contoured in between the anvils.• Adjust the gap between the anvils using screw A until the handle isparallel with the base.• Pressure on the handle will bend the plate.• Readjust the press using screw A to bring the handle parallel onceagain.• Contouring the plate should be accomplished using several smalladjustments rather than one big one.001281 Bone Plate Press Small 285mm.For plates up to and including 4.5mm narrow £475.00001282 Bone Plate Press Large 16” 410mm.For all plates. £475.00001289APLATE BENDING PLIERS - ROLLER TYPE001283 Plate Bending Pliers Roller Type 15” 380mm.Suitable for 3.5 and 4.5mm Plates £195.00Bone Plate Press001282001282Bone plates suitable for 3.5mm and 4.5mm screws are extremely difficultto contour in a controlled manner. Most human orthopaedic presses, iflarge enough to contour the plate, are too large to fit in the typicalveterinary surgeon's autoclave.The Small Bone Plate Press is designed for all small animal plates and willfit in your autoclave. Will contour 2.7, 3.5, 3.5 broad and 4.5 narrow plates.The Large Bone Plate Press will contour all plates but is 410mm long socheck your autoclave before purchase.PLATE BENDING001280 AO type 1.0 Bending Levers (pair) 110mm £60.00001286 AO type 1.5/2.0 Bending Levers (pair) 130mm £55.00001285 AO type 2.4 Bending Levers (pair) 140mm £60.00001287 AO type 2.7/3.5 Bending Levers (pair) 140mm £65.00001288 AO type 3.5/4.5 Broad Bending Levers (pair) 200mm £75.00001288L AO type 3.5/4.5 Broad Bending levers. Long version. 240mm £85.00001283 Plate Bending Pliers, Roller Type 15", 380mm £195.00001284A Reconstruction Plate Pliers 2.7mm plates 280mm £175.00001284 Reconstruction Plate Pliers 3.5mm plates 280mm £175.00001281 Bone Plate Press Small 285mm £475.00001282 Bone Plate Press Large 16", 410mm £475.00001289A 2.0/2.7mm Bone Plate Contouring Pliers 195mm £335.00001289B A0 style 2.7/3.5mm Plate Bending Pliers 220mm £385.00001289C A0 style Heavy Duty Plate Bending Pliers 250mm £545.00168