Chapter 7 - Veterinary Instrumentation

7 TRAUMA IMPLANTS & INSTRUMENTSInsert SleevesDrill Sleeves centre smaller drills in theplacement of lag screws.INSERT SLEEVESSL2015 Insert Sleeve 2.0mm o/d 1.5mm i/d £41.50SL2418 Insert Sleeve 2.4mm o/d 1.8mm i/d £41.50SL2720 Insert Sleeve 2.7mm o/d 2.0mm i/d £41.50SL3520 Insert Sleeve 3.5mm o/d 2.0mm i/d £41.50SL3525 Insert Sleeve 3.5mm o/d 2.5mm i/d £41.50SL3527 Insert Sleeve 3.5mm o/d 2.7mm i/d £41.50SL4532 Insert Sleeve 4.5mm o/d 3.2mm i/d £41.50SL5540 Insert Sleeve 5.5mm o/d 4.0mm i/d £41.50SL6545 Insert Sleeve 6.5mm o/d 4.5mm i/d £41.50Tissue Protection SleevesRotating pins, drills andtaps will "pick up" softtissues, skin, muscle,nerve and blood vessels,causing serious damage.Use of tissue protectionsleeves minimises suchdamage. The teeth at thetop of the guide locate onthe bone whilst thestainless tube provides abarrier between softtissue and implantequipment.Screwdrivers & ScrewholdingSleevesScrewdrivers with screw holding sleeves hold the screw until it hasengaged in the threaded hole. The sleeve is slid back up the shaft torelease the screw without disengaging it.Screwdriver for 1.0mm ScrewsThe 1.0mm Screwdriver consists of an Insert and Handle. The Insert is adedicated crosshead screwdriver tip for use with our 1.0mm screws. Thecentral ‘pip’ on the end engages with a small recess in the centre of our1.0mm screwheads. This improves the coupling for improved driving. Thehead of our screwdriver rotates in the hand allowing excellent control andpure axial rotation. It is also very light, making it ideal for drilling the verysmall holes required for our 1.0mm Plating System. It has a combinedcollet and dog drive system to hold accessories very firmly — somethingthat can be difficult to achieve as accessory size reduces.SCREWDRIVER FOR 1.0MM SCREWSSDIN1.0 Screwdriver Insert for 1.0mm Screws £49.50SDH1.0 Screwdriver Handle for 1.0mm Screws £145.00Hex Screwdrivers for 1.5, 2.0 & 2.4 ScrewsScrewdriver & Sleeve for 2mm screws. SDHS20FTISSUE PROTECTION SLEEVESTP2020 For Drill/ Taps to 2.0mm 90mm £59.50TP0024 For Drill/ Taps to 2.4mm 90mm £59.50TP0027 For Drill/ Taps to 2.7mm 90mm £59.50TP0035 For Drill/ Taps to 3.5mm 90mm £59.50TP0045 For Drill/ Taps to 4.5mm 90mm £59.50HEX SCREWDRIVERS & SCREWHOLDING SLEEVES 1.5/2.0/2.4 ScrewsSSH2000 Screwholding Sleeve to fit SDHS20F £42.50SDHS20F1.5mm Hex Screwdriver + Sleeve - with Fibre Handlefor 1.5, 2.0, 2.4mm screws 125mm £85.00Drill StopsDrilling to a pre-measureddepth can be a challengeeven with a ‘C’ arm! A morereasonably priced option isto use a drill stop which istightened onto the drill bit atthe required depth. The setincludes 4 stops to cover allthe standard drill sizes.2.0, 2.5, 2.7, 3.2, 3.5 &4.5mmThe stop is tightened ontothe drill bit using the hexdriver provided.Screwdrivers for 2.7, 3.5 & 4.0 ScrewsHEX SCREWDRIVERS & SCREWHOLDING SLEEVES 2.7/3.5 & 4.0 ScrewsSSH2741 Screwholding Sleeve to fit SDH535F £42.50SDHS35F2.5mm Hex Screwdriver + Sleeve with Teflon Handlefor 2.7, 3.5, 4.0mm Screws 200mm £85.00Screwdrivers for 4.5, 5.5 & 6.5mm ScrewsDRILL STOPSPhoto: Jean-Beniot LefebvreDRILLSTOP Drill Stop Set in Stainless Case £105.00HEX SCREWDRIVERS & SCREWHOLDING SLEEVES 4.5, 5.5 & 6.5 ScrewsSSH4500 Screwholding Sleeve to fit SDH3500 £42.50SDH35003.5mm Hex Screwdriver for 4.5, 5.5 & 6.5mm Screws250mm £85.00164