Chapter 7 - Veterinary Instrumentation

7 TRAUMA IMPLANTS & INSTRUMENTS2.4mm Screws & Plates2.4mm Compression Plates2.4mm Cortical Self Tapping Screws1 lengthpilot 1.8mmclearance 2.4mm2 Cutting FlutesWhen working with cats and other smaller patients it is often the case that2.0mm screws and plates are too small and 2.7mm screws and plates aretoo large. The jump from 2.0 DCPs to 2.7 DCPs is huge. 2.4mm screws areused in veterinary surgery but until now have not been available as a fullrange of cortical screws and DCPs.Currently only available in the self tapping format. A quick fit tap is alsoavailable.The screwdriver required is the same as 1.5 & 2.0 screws (SDHS20F).Available as a full set comprising 5 of each screw 6mm through 30mm, oneof each plate, 1.8 drill, 2.4 drill & load / neutral drill guide. All are containedin a stainless screw box / instrument case.2.4 CORTICAL SELF TAPPING SCREWS - HEX HEAD 1.5 (USE 1.8MM PILOT)CSST2406 6mm £4.75CSST2407 7mm £4.75CSST2408 8mm £4.75CSST2409 9mm £5.25CSST2410 10mm £5.25CSST2411 11mm £5.25CSST2412 12mm £5.25CSST2414 14mm £5.75CSST2416 16mm £5.75CSST2418 18mm £6.25CSST2420 20mm £6.25CSST2422 22mm £7.00CSST2424 24mm £7.00CSST2426 26mm £7.50CSST2428 28mm £7.50CSST2430 30mm £8.00CSST2432 32mm £8.00CSST2434 34mm £8.50CSST2436 36mm £8.50CSST2438 38mm £9.00CSST2440 40mm £9.00CORTSTKIT24 Kit including Case, Screws, Plates, Drills, £1,375.00Load/ Neutral Drill Guide, Bending Leversand Screwdriver2.0mm, 2.4mm and 2.7mm Screws may be used with all 2.4mm Implants.2.0 DCPs are often too small and 2.7 DCPs are often too large. The 2.4DCP falls exactly in between the 2.0 and the 2.7 in terms of weight and holesize and spacing. Plate profile on page 341.2.0mm and 2.7mm cortical screws may be used with the 2.4 mm DCP plate.2.4 DCPs have a matt finish to distinguish them from 2.0 and 2.7 plates.Use LNDG24 Load Neutral Drill Guide to obtain compression with 2.4cortical screws.Use BX24CS as an equipment box for 2.4mm screws and plates.2.4MM COMPRESSION PLATESHolesLength mmC240431 4 31 £29.50C240538 5 38 £32.50C240645 6 45 £37.50C240752 7 52 £42.50C240859 8 59 £47.50C240966 9 66 £52.50C241073 10 73 £67.50C241180 11 80 £72.50C241287 12 87 £77.50C2414101 14 101 £85.00C2416115 16 115 £95.00H090208 1.8 Pilot Drill for 2.4 System £19.50H090209 2.4 Clearance Drill for 2.4 System £21.50LNDG24 Load/ Neutral Drill Guide for 2.4 System £140.002.4mm Limited Contact (LC) Compression PlateFollowing requests we have now added a range of Limited Contact (LC) Plateswith cutaways. See profile page 380.2.4mm LIMITED CONTACT (LC) COMPRESSION PLATESLC2404038 4(number of holes) 38(length in mm) £52.50LC2405046 5 46 £55.00LC2406054 6 54 £60.00LC2407062 7 62 £65.00LC2408070 8 70 £70.00LC2409078 9 78 £75.00LC2410086 10 86 £80.00LC2411094 11 94 £85.00LC2412102 12 102 £90.00176