Chapter 7 - Veterinary Instrumentation

7 TRAUMA IMPLANTS & INSTRUMENTSDrill BitsSHERMAN - Pilot - 1.6 2.4 2.7 - - -TYPE MAN - Clear - 2.0 2.7 3.5 - - - Following surgeon feedback we have added a limited range of AesculapDrill Bits Aesculap AO Quick FitWHICH DRILL DIAMETER1.5 2.0 2.7 3.5 4.0 4.5 5.5AO TYPE - Pilot 1.1 1.5 2.0 2.5 2.5 3.2 4.0CORTICAL - Clear 1.5 2.0 2.7 3.5 4.0 4.5 5.5Drill Bits to our range.Drill Bits - SoftDRILL BITS - AESCULAP AO QUICK FITMade from DIN 58812 Stainless Steel (the same as implants). The Drill(diameter mm)Bits are compatible with all current plating systems. Replace Drill every ten(length in mm)holes. Blunt Drills cause heat necrosis. Cheap but do not last long.GC310R 1.1 35mm £27.00DRILL BITS - Stainless Steel 316 Implant Quality - Short LifeGC312R 1.5 60mm £27.00090101 (diameter in.) 1.5 (diameter mm) 127mm £10.00GC314R 2.0 75mm £25.00090111 1/16 1.6 127mm £10.00GC315R 2.5 85mm £26.00090102 5/64 2.0 127mm £10.00GC316R 2.7 75mm £27.00090103 3/32 2.4 127mm £10.50GC320R 3.5 85mm £27.00090112 2.5 127mm £10.50090104 7/64 2.7 127mm £10.50090105 1/8 3.2 127mm £11.00090106 9/64 3.5 127mm £11.00090113 3.6 127mm £11.00090107 5/32 4.0 127mm £11.00090108 11/64 4.5 127mm £13.00090118 3/16 4.8 127mm £13.00090109 1/4 6.35 127mm £13.00090115S Drill Box S/Steel Empty (for I/Q Drills) £105.00090116 Drill Box S/S Complete with I/Q Drills (9) £165.00Drill Bits - HardExpensive but last a long time. All Quick Fit Drills, and those round shankDrills with a diameter of 3.2mm or more, come in short and long lengths.These Drills are much stiffer than implant quality ones. Particularlyrecommended for Drills less than 3.2mm diameter. Drill fragments do notcause a problem. G suffix indicates Gold Titanium Nitride Coating.DRILL BITS - Stainless Steel 420 Hard- Not Implant Quality - Long Life - Round ShankH090100 0.045 (dia in) 1.1 (dia mm) 60 (length mm) £18.50H090101 1.5 60 £18.50H090208 1.8 80 £19.50H090102 5/64 2.0 100 £20.00H090209 2.4 115 £22.50H090112 2.5 115 £20.50H090112G 2.5 115 £28.50H090104 7/64 2.7 130 £20.50H090105S 1/8 3.2 130 £21.50H090105L 1/8 3.2 180 £22.50H090106S 9/64 3.5 130 £22.50H090106L 9/64 3.5 180 £25.00H090107S 5/32 4.0 130 £25.00H090107L 5/32 4.0 180 £25.00H090108S 11/64 4.5 130 £25.00H090108L 11/64 4.5 180 £29.00H090109S 5.5 130 £25.00H090109L 5.5 180 £29.00H090202 1.9mm Predrill for 2.0mm Shank Positive Pin. £20.50H090203 2.3mm Predrill for 2.4mm Shank Positive Pin. £20.50H090205 3.0mm Predrill for 3.2mm Shank Positive Pin. £23.00H090207 3.8mm Predrill for 4.0mm Shank Positive Pin. £25.00090117 Drill Box S/S complete with Hard Drills (10) £265.00212Drill Bits - AO Quick FitQuick Fit Drills have a Quick Release Coupling which enables them to bequickly switched using a Quick Release Drill Attachment as supplied withthe MiniDriver, MaxiDriver, MPX, MPZ Systems and most other poweredsystems. G suffix indicates Gold Titanium Nitride Coating.DRILL BITS - AO QUICK FITS090100S 0.045 (dia in.) 1.1 (dia mm) 60 (length mm) £27.00S090101S 1.5 60 £27.50S090101L 1.5 95 £29.50S090208 1.8 80 £28.50S090102S 5/64 2.0 100 £25.75S090102L 5/64 2.0 125 £27.75S090209 2.4 115 £27.75S090112S 2.5 110 £26.25S090112SG 2.5 110 £34.00S090112L 2.5 180 £28.00S090104S 7/64 2.7 100 £27.50S090104L 7/64 2.7 125 £29.50S090105S 1/8 3.2 145 £28.50S090105L 1/8 3.2 195 £30.50S090106S 9/64 3.5 110 £29.00S090106L 9/64 3.5 195 £31.00S090107 5/32 4.0 145 £28.00S090108S 11/64 4.5 145 £29.50S090108L 11/64 4.5 195 £31.50S090109 5.5 145 £35.00S090SET Drill Box Complete with AO Drills (10) £325.00