Front-mounted external venetian blind type R 6/10

Product information2.4 Wind speed limitsFor external venetian blinds, the use of wind speed limits(see Tab. 2) depends on the particular product type. If thewind speed limits are reached, the unit must be retracted.Basis for Tab. 2:1. Slat facade distance: ≤ 100 mm2. Slat thickness: ≥ 0.4 mmDetails on Beaufortnumber (m/s inbrackets)Width up to 1500mmWidth up to 2000mmWidth up to 2500mmWidth up to 3000mmWidth up to 4000mmTab. 2:Beaded slatwith rails (slatwidth up to 80mm)7(13.5 – 17.4)7(13.5 – 17.4)7(13.5 – 17.4)7(13.5 – 17.4)6(10.5 – 13.4)Recommended wind speed limitsFlat slat withrails (slat widthup to 80 mm)7(13.5 – 17.4)6(10.5 – 13.4)6(10.5 – 13.4)6(10.5 – 13.4)5(7.5 – 10.4)2.5 CE conformityThe product conforms to CE and meets the requirementsof the relevant European guidelines.CE conformity is certified, and WAREMA holds thecorresponding declaration. To maintain this state and toensure that the product can be safely installed and putinto operation, you as the fitter must adhere to theinstallation instructions.Name: WAREMA Renkhoff SEYear of declaration of conformity: 2008Headoffice:Hans-Wilhelm-Renkhoff-Straße 297828 MarktheidenfeldGermanyStandard: DIN EN 13659Product: External venetian blindIntended use:For outdoor installationWind class: 0 3Noise emission level 4 : < 70 dB (A)34Specification of wind class 0, since standard test standscannot be used in the applicable test standard due tomechanical inadequacies of the test description.Depending on the model and the installation location, theproduct can be used up to the wind speed limits specifiedabove (Tab. 2).In a standard installation of the product on a test stand, thenoise emission level is