Front-mounted external venetian blind type R 6/10

More documents

Recommendations

Info

Care5 Care/maintenance5.2 Care instructions5.1 General information on care andmaintenanceProper and regular care and maintenance and the use oforiginal spare parts only are essential for fault-freeoperation and a long product life.DANGERRisk of injury from operation of the externalvenetian blind when it is out of view.• Disconnect the external venetian blind fromthe automatic control and/or power. NOTEEnsure that the external venetian blind is not movedduring maintenance and repair work in its directproximity – e.g. window-cleaning.Disconnect the product from the power supply.To ensure the longest possiblelife, we recommend you cleanthe surface of the productregularly and at least once ayear.Replacement claims based onthese cleaning and careinstructions cannot be honouredbecause the effectiveness ofthese measures depends on alarge number of factors that varyfrom case to case.• Clean the external venetian blind regularly. Observethe "Cleaning Procedures" table.Cleaning procedureUse suitable cleaning products on thesurfaces.Remove dust and soiling from the guide rails.DANGERRisk of injury and falling!• Do not rest climbing aids against theproduct.• Climbing equipment must rest on a solidfoundation and offer good support andsufficient carrying capacity.• Never hold on to the product for support orreach into the slats.• Check the operating elements, lifting tapes andguiding nipples for visible wear and damage.• Check the installation substructure for damage.• Check that the external venetian blind is functioningproperly. Watch the product as it travels the full rangeof movement and look out for any unusual behaviouror noises.• Have any damage repaired by a qualified specialistas soon as you can.CAUTIONProduct could be damaged by incorrectcleaning!• Do not use high pressure washers,abrasive cleansers or sponges, andsolvents such as alcohol or benzene.• Do not support yourself on the product orparts of the product. Do not bend the slats.[B866866_0] - EN / 01.04.08 Page 8 of 12 Subject to change without notice.
Maintenance/warranty5.3 Maintenance instructionsDANGERThe product must be maintainedregularly and at least once ayear.Inspection and maintenancework is only to be carried out byan appropriate qualifiedspecialist. We recommend youtake out a maintenanceagreement with a qualifiedspecialist.Risk of injury through irregular maintenance!• Check the external venetian blind regularlyfor signs of wear and damage, e.g. on themotor cable or lifting tape.6 WarrantySubject to the statutory period of limitation for warrantyclaims. This requires regular maintenance. The warrantydoes not include wear parts or optical changes in line withthe type of material used (e.g. bleaching of surfacescaused by UV rays).Wear parts are Gear drive Crank, crank rod Lifting tape Tilting tape Bearings• Do not continue using external venetianblinds that require repair.DANGERElectric shock!When inspecting or maintaining electrical parts,the closure must be de-energised and lockedout.• Check the external venetian blind for visible wear,damage to the motor cable and to ensure it issecurely attached (e.g. check that screws have afirm hold).• Check the function and the switch-off points on theexternal venetian blind.• Check the lifting tapes and guiding nipples forvisible wear or damage.• Check that the guide elements are firmly seated.• Change the battery on systems with remote control.• Inform the user of operating risks (e.g. icing).• Alert the user to the attachment of the label.[B866866_0] - EN / 01.04.08 Page 9 of 12 Subject to change without notice.
Page 1 and 2: WAREMA front-mounted external venet
Page 3 and 4: Product information2 Product inform
Page 5 and 6: Operation3 Operation NOTEIf using a
Page 7: General safety information4 General
Page 11 and 12: Troubleshooting9 TroubleshootingCAU

Front-mounted external venetian blind type R 6/10

Create successful ePaper yourself

Delete template?

Save as template?