INVERTER WALL MOUNTED TYPE ROOM AIR ... - Aircon.Ru

Note (1) The number of flashes when in the Service Mode do not include the 1.5 second period when the lights light up at first (starting signal). (See the exampleshown below.)• In the case of current safe (heating CT1) (example: stop code “32”)The RUN light (10’s digit) flashes 3 times and the TIMER light (1’s digit) flashes 2 times.3 × 10 + 2 × 1 = 32 → From the table, read the instructions for error code 32, “Current safe (heating CT1).RUN light(10’s digit)TIMER light(1’s digit)ONOFFONOFF1.5 sec.0.5 sec.0.5 sec.11-second intervalNotes (2) Abnormal Stop: - Is not displayed. (automatic recovery only)⁄ Displayed.If there is a ( ) displayed, the error display shows the number of times that an automatic recovery occurred for the same reason hasreached the number of times in ( ).If no ( ) is displayed, the error display shows that the trouble has occurred once.Notes (3) Automatic Recovery: - Does not occur⁄ Automatic recovery occurs.(d)Remote control information tables1) Operation switching2) Fan speed switchingDisplay pattern whenin service modeRUN light(Operation switching)01234Operation switchingwhen there is anabnormal stopAUTODRYCOOLFANHEATDisplay pattern whenin service modeTIMER light(Fan speed switching)023467Fan speedswitching whenthere is anabnormal stopAUTOHIMEDLOHI POWERECONO* If no data are recorded (error code is normal), the information display in the remote control becomes as follows.Remote control settingOperation switchingFan speed switchingDisplay when error code is normal.AUTOAUTO(Example): Operation switching, fan speed switching, cooling HIRUN light(10’s digit)TIMER light(1’s digit)ONOFFONOFF1.5 sec.0.5 sec.0.5 sec.11-second interval- 39 -