Protec Fire Detection

ProtecProtec Fire Detection plcFire DetectionFire and Smoke Door Control SystemsA D D R E S S I N G S A F E T Y S Y S T E M S W I T H I N T E L L I G E N C E

Fire DetectionProtecP ro t e c F i re D e t e c t i o n p l cFIRE & SMOKEDOOR CONTROL SYSTEMS996 Series Door ControlsIn order to meet the requirements of the DisabilityDiscrimination Act and the revision to the buildingRegulations, Part M:2004 it is necessary to considercarefully the use of conventional door closers onentrance doors and other circulation doors within abuilding. The Protec 996 is a single action electromagneticallycontrolled closing device, doormounted with an arm set enabling on-site choice of‘hold open’ or ‘free swing’ function, effective bymeans of a single change on installation.996 Series Technical DataRecommended door size limits for size 3 closersCloser Type Max. Door Width Max Door WeightApp 1, App 61 and App 66 950mm 60kgDimensions:305mm (long) x 57mm (deep) x 92mm (projection)Power Requirements:24V dc 90mA nominal.Finishes:Silver steel covers are Zintex treated for protection against corrosion andcome as standard. Gold, brown-bronze etc are available on request.The unit is available in two models:996/01 - App 1 or App 61 - where the unit is either doormounted to ‘pull’ side of door or transom mounted to‘push’ side of door.996/66 - App 66 - where the unit is door mounted to‘push’ side of door. All models are self handling.996 Series - App 1Hold Open - The angle of ‘hold open’ can be adjustedfrom approximatly:App 1: 85° - 95° and 103° - 110°App 61: 85° - 95°App 66: 65° - 85° and 90° - 105°For optimum performance door stops should be fittedjust beyond these angles.Free Swing - By selecting the function on the arm set,the closer arms and the door are allowed to pivotindependently of the closer and catch plate.The catch plate can be adjusted to vary the angle offree swing from approximatly:App 1 and App 61: 85° - 95°App 66: 65° - 85°Please note: While in free swing mode, the door isnot under the control of the closer and cannot beprevented from slamming under the influence of windor draught.Although the door can open to 105° (App 1 and App61) and 180° (App 66), it is recommended that a stopshould be fitted just beyond the set free swing angle.996 Series - App 61Order Codes996/01 (67-226-74) - App 1 or App 61 Dual functionhold open/free swing unit.996/66 (67-227-75) - App 66 Dual function holdopen/free swing unit.996 Series - App 66A D D R E S S I N G S A F E T Y S Y S T

Fire Door RetainersFire Door RetainersElectromagnetic Fire Door Holders are designed tohold open Fire Doors in any areas where easyDisability Discrimination Act access is essential, andcan be used in conjunction with any suitable firealarm systems. When an alarm is triggered, power tothe door holder is cut, allowing the fire door fittedwith it’s standard closing mechanism, to shutautomatically.Fire DetectionConcept ‘90DRW Traditional Door RetainerTechnical Specification Concept ‘90 DRW TraditionalSupply Voltage 24V dc or 230V ac 24V dc or 230V acHolding Force 200N or 500N 200N (+20%)Power Rating 1.15W 1.15WResidual Holding Force Zero ZeroAmbient Temperature 0 - 40°C -10 to 50°CProtection IP51 IP51CasingWhite Fire Resistant ABS SteelWeight 360g / 500g 420g / 530gConcept ‘90 Door Retainer9587 46DRW Traditional Door Retainer868662Concept ‘90 Door RetainerSurface mounted, and is housed in a white Fireresistant ABS casing.Type tested to meet EN1155,knockouts for surface or back cable entry, and aspring loaded pin to give zero residual holding forcewhen de-energised.Order CodesC90024 (67-213-69) - 24V dc Door Retainer UnitC90240 (67-214-70) - 230V ac Door Retainer UnitDRW Traditional Door RetainerThe ever popular DRW range has been successfullymarketed over many years. Rugged, dependableperformance suitable for all applications, inparticular where the moisture ingress protection isnot called for.Order CodesDRW024 (67-209-65) - 24V dc Door Retainer UnitDRW240 (67-210-66) - 230V ac Door Retainer UnitKeeper Plate4 Holes Dia 5.0on 54.0 PCDPSFR Power SuppliesProtec have designed a range of PFSR - 24V dcunregulated power supplies, to power and controlelectro-magnetic door retainer devices. Housed in asheet steel enclosure with 20mm cable entries,finished in black epoxy powder coating.51DRF Floor Mouting Bracket51 38.5OrderCodesRecommended numberof retainer units @100mA eachMax CurrentPFSR4 1-4 0.45APFSR10 4-10 1.25APSFR30 10-30 3.25ADimensions (mm) 230 x 158 x 88DRF Floor Mounting Bracket29.5095361024V DC TODOOR RETAINERSFIRE RELAYNORMALLYCLOSED26263622.50º112+OUTPUTCONTROLCIRCUIT4815.5050E N LSuitable for floor mounting both Concept ‘90 and DRW traditional rangedoor retainer units.Order Code - DRF (67-208-64A) Optional Floor Mounting bracket.PFSR Power Supply240V AC SUPPLYIMPORTANTPower for ancillary devices must not be drawn from thealarm system except under alarm conditions (BS 5839Part 1). Therefore door controls require a seperatepower supplyE M S W I T H I N T E L L I G E N C E