About HYDAC - Intelligent Machine Dynamics Lab

Model Code:SeriesHDA 38 = Pressure Transducer for Steel WorksMechanical Connection0 = G 1/2 A male thread4 = G 1/4 A DIN 38527 = SAE 6 9/16-18 UNF2A maleElectrical Connection0 = flying lead 6m (Teflon cable, silicon-free)Signal TechnologyA = 2 conductor, 4-20 mAE = 3 conductor, 0-20 mAPressure Range350 = 350 bar (5075 psi)Modification Number124 (determined by manufacturer)HDA 38 X 0 - X - 350 - 124Note: PSI pressures on request— Contact HYDAC for availabilityCircuit Connection:2 conductor 4 to 20 mAHDA38xx-AbrownblueRLRL0VUB3 conductor 0 to 20 mAblackHDA38xx-EbrownblueRLUBSignal0VPlug Connection:A-SignalBrown:Blue:E-SignalBlack:Brown:Blue:+ Supply0V+ SupplySignal0VRLmax. = UB - 10 V [Ω]0.02 ARLmax. = UB - 7 V [Ω]0.02 ANote: The load resistance RL is produced by the measuring resistance inside the evaluation unitand the line resistance of the connection line.UB = + supply voltageDimensions:cable glandpg 7ø1.18"(30mm)ø1.06"(27mm)0.31"(8mm)ø0.74"Hex1.17"(18.9mm) G1/4 A(29.6mm)cable glandpg 7ø1.18"(30mm)ø1.06"(27mm)0.31"(8mm)ø1.06"HexG1/2 A 1.17"(26.9mm) (29.6mm6 m(fully extendedcord length)3.23"(82mm)4.13"(105mm)0.08"(2mm)6 m(fully extendedcord length)3.23"(82mm)4.13"(105mm)0.12"(3mm)1-877-GO HYDACElectronics Catalog 20