About HYDAC - Intelligent Machine Dynamics Lab

ISO Certified:ISO Certified / Common TermsHYDAC has become a leader in hydraulicsand pneumatics. We have earned that roleby emphasizing quality, innovation, andexcellence in everything we manufacture.HYDAC is committed to maintaining thosehigh standards of quality and service inaccordance with the ISO 9001International Standard.Common Terms:Accuracy - the error ratio of the full scale output or the error ratio of the output expressed in %Ambient Conditions - conditions of the medium surrounding the transducer (pressure, temperature, etc...)Best Fit Straight Line (BFSL) - an average of the deviation of all calibration pointsExcitation - the external power supply applied to a device for its proper operationEMI Susceptibility - the level or degree to which a device is vulnerable to electromagnetic interferenceFull Scale (FS) - relative to the full measuring rangeHysteresis - the maximum difference in electrical output at any pressure value within the specified range betweenan increasing and decreasing cycleLinearity - the closeness of a calibration curve to a specified straight linePressure - force per unit of area exerted by a fluid at some point in the systemRepeatability - the ability of a transducer to reproduce outputTemperature Range (Operating) - the interval of temperatures in which the transducer is intended to be usedPLEASE NOTE:Certain combinations are subject to availability and/or approval. There may be a minimum quantity required for certain combinations.Requirements will be determined at time of inquiry or purchase order. Alternatives may be suggested by product management.Specifications and dimensions given in this catalog represent engineering configurations at the time of printing.Modifications may take place and product materials are subject to change without prior notice.1Electronics Catalog