About HYDAC - Intelligent Machine Dynamics Lab

SP1SP2SP1SP2Model Code:EDS 3 X X - X - XXX - XXX.SeriesETS 3 = 300 series electronic temperature SwitchMechanical Connection2 = G 1/2 A male thread with integral sensor8 = electrical connection for separate sensor (TFP 100)Electrical Connection6 = M12x1 plug, 4 pole for output codes 2 & 3 (connector not included)8 = M12x1 plug, 5 pole for output codes 5 (connector not included)Output2 = 2 switching outputs (only in conjunction with electrical connection type “6”)3 = 1 switching output and 1 analog output (only in conjunction with electrical connection type “6”)5 = 2 switching output and 1 analog output (only in conjunction with electrical connection type “8”)Measuring Ranges100 = -25° to 100°C (-13° to 212°F) only for version with integral sensor150 = -30° to 150°C (-22° to 302°F) only for version with separate sensorModification Number000 = display in °C400 = display in °FCircuit Connection:Model ETS 3X6-22 switching outputslmax. 1.2 A+ 1 4SP 120 to 32 VDC ETS 3X6-2lmax. 1.2 A- 3 2SP 2Model ETS 3X8-52 switching outputs 1 analogue ouputlmax. 1.2 A+ 1 4 SP 1lmax. 1.2 A20 to 32 VDC ETS 3X8-5 SP 1l = 4 to 20 mA- 3 2analogueRLPlug Connection:ETS 3X6 ETS 3X8 ZBE 06 (4-pole) & ZBE 08 (5-pole)(4-pole) (5-pole) (see page 56)431 24 31 5 2Model ETS 3X6-31 switching output 1 analogue outputlmax. 1.2 A+ 1 4SP 120 to 32 VDC ETS 3X6-3l = 4 to 20 mA- 3 2analogueRLDimensions:ConnectorM12x14 pole male3.44"(87.5mm)PSImodeETSø 1.4"(35mmConnectorM12x14 pole male2.97"(75.5mm)PSImodeETSø 1.4"(35mm)0.65"(16.5mm)ZBE 03 plugø 1.06"(27mm)ø 0.76"(9.3mm)0.73"(18.5mm)0.55"(14mm)26mmG 1/2hex SW270.12"(3mm)0.55"(14mm)0.67"(17mm)4.96"(126mm)0.55"(14mm)3.94"(100mm)0.12"(3mm)ø 0.24"(6mm)G 1/2AHexSW270.71"(18mm)1.16"(29.5mm)~2.05"(52mm)ø 0.87"(22mm)M 12x1connectorconnection cable LIYCY(3m length)1.16"(29.5mm)ø 0.24"(6mm)TFP 100 (temp. sensor)ø 0.31"(8mm)Safety Sleeve1-877-GO HYDACElectronics Catalog 44