INSTRUCTION MANUAL - Omron Healthcare

ERROR INDICATORS AND TROUBLESHOOTING TIPSERROR INDICATORSSYMBOL CAUSE CORRECTIONAir plug disconnected.Arm cuff not applied correctly.Insert the plug securely. Refer to “Applying theArm Cuff”.Apply the arm cuff correctly. Refer to “Applyingthe Arm Cuff”.Air is leaking from the arm cuff.Cuff over inflated.Replace the cuff with the new one.Repeat measurement. Remain still and do not talkduring measurement. Refer to “Taking aMeasurement”.If “E2” appears repeatedly, inflate the cuff manuallyuntil it is 30 to 40 mmHg above your previousmeasurement result. Refer to “Taking a Measurement”.The arm cuff was inflated above 299mmHg when inflating the cuff manually.Movement during measurement.Do not inflate the cuff above 299 mmHg. Refer to“Taking a Measurement”.Repeat measurement. Remain still and do not talkduring measurement. Refer to “Taking aMeasurement”.Clothing is interfering with thearm cuff.Remove any clothing interfering with the arm cuff.Refer to “Applying the Arm Cuff”.Device error.Contact Customer Service.Cuff is not applied correctly.Refer to “Applying the Arm Cuff”.Batteries are wornReplace the four batteries.Refer to “Battery Installation”.39