tYSR20

Appendix: About the CD 39511. Drag the STL_doc folder to your computer’s hard drive (optional).You may prefer to copy the STL_doc to your hard drive so that it is availableeven when you’re catching a few tunes from your newest WillieNelson CD.Using the CD with LinuxTo install the items from the CD to your hard drive, follow these steps:1. Log in as root.2. Insert the CD into your computer’s CD-ROM drive.3. If your computer has Auto-Mount enabled, wait for the CD to mount;otherwise, follow these steps:a. Command line instructions:At the command prompt typemount /dev/cdrom /mnt/cdrom(This mounts the cdrom device to the mnt/cdrom directory. If yourdevice has a different name, change cdrom to that device name —for example, cdrom1.)b. Graphical:Right-click the CD-ROM icon on the desktop and choose MountCD-ROM. This mounts your CD-ROM.4. Copy the CPP_Program directory to /src. Refer to Chapter 1 forinstructions on how best to use these source files.The version of Dev-C++ contained on the CD-ROM is not compatible withLinux; however, you can download a version for your operating systemat www.bloodshed.net. Installation instructions are included at that site.5. To remove the CD from your CD-ROM drive, follow these steps:a. Command line instructions:At the command prompt typeumount /mnt/cdromb. Graphical:Right-click the CD-ROM icon on the desktop and choose UMountCD-ROM. This unmounts your CD-ROM.After you have installed the programs you want, you can eject the CD.Carefully place it back in the plastic jacket of the book for safekeeping.