Manual induSENSOR Serie EDS - Micro-Epsilon

More documents

Recommendations

Info

3. Delivery3.1 UnpackingDo not take and hold the sensor at the sensor rod.Check for completeness and shipping damage immediately after unpacking.SensorhousingThe delivery of an eddy current long stroke displacement sensor includes:1 Eddy current long stroke displacement sensor 1 O-ring (mounted on sensor) 11 Measuring tube 1 Test report1 Instruction manualIn case of damage or missing parts, please contact the manufacturer or supplier.3.2 Storage--Storage temperature: -40 °C up to +100 °C (-40 to +212 °F)--Humidity: 5 - 95 % (no condensation)--Atmospheric pressure1) For sensor models S and F onlyinduSENSOR, EDSPage 12
4. Installation and Assembly4.1 Precautionary MeasuresThe measuring tube must not contact the sensor rod during operation.> > Damage to or destruction of the sensor through abrasion is possible.Do not deform or shorten the measuring tube.> > Loss of specified technical data.Do not crush the O-ring or damage through sharp-edged items.> > Loss of functionality4.2 Measuring Tube Guide and FasteningMount the measuring tube in the piston bore hold.The dimensions for the measuring tube are shown, see Fig. 8 et seq. When the piston is moved in the measuringtube must not touch the sensor shaft. Observe the measuring tube position at the zero point(= 4 mA output), see Fig. 2 et seq. A slightly eccentric mounting of the measuring tube has no negative influenceon the sensor signal.Mount the measuring tube in the piston by means of pressing or glueing.Spot clamping is not permissible.iThe specified technical data are valid only if the measuring tube is used supplied byMICRO-EPSILON!induSENSOR, EDSPage 13
Page 1 and 2: Instruction ManualinduSENSOR, EDSED
Page 3 and 4: Contents1. Safety..................
Page 5 and 6: 1. SafetyThe handling of the sys
Page 7 and 8: 1.5 Proper Environment--Protecti
Page 9 and 10: 2.2 StructureA coil is mounted i
Page 11: ModelEDS-75EDS-100EDS-160Connect
Page 15 and 16: 4.3 Sensor Mounting4.3.1 Model E
Page 17 and 18: Dimensional drawing, model EDS-
Page 19 and 20: min 30(1.18) ABø30 (1.18 dia.)3
Page 21 and 22: ø80.0 (ø3.15)12.0 (.47)abcda
Page 27 and 28: 4.4 Power Supply and Display/Out
Page 29 and 30: ConnectorType CA02COM-G14SThe C7
Page 31 and 32: EDS-...-ZR Lcan be inserted as a
Page 33 and 34: 5. OperationThe sensors have no
Page 35 and 36: 9. AppendixAccessoriesDD241 PC (

Manual induSENSOR Serie EDS - Micro-Epsilon

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?